···
Log in / Register

What is the engine of the Oshan X7?

6Answers
Alice
08/27/2025, 02:48:43 AM

Changan Oshan X7 is equipped with a 1.5-liter turbocharged engine across the entire lineup. Here is more information about the Changan Oshan X7: 1. The Changan Oshan X7 is a compact SUV under the Changan brand, with dimensions of 4705 mm in length, 1860 mm in width, and 1720 mm in height, and a wheelbase of 2780 mm. 2. The engine code of the Changan Oshan X7 is JL476ZQCF, with a maximum power of 131 kW and a maximum torque of 265 Nm. This engine can deliver its maximum torque at 1450 rpm and maintain it up to 4500 rpm, while the maximum power is achieved at 5500 rpm. 3. The engine of the Changan Oshan X7 features direct fuel injection technology and uses an aluminum alloy cylinder head and block.

Was this review help?
118
Share
MalachiMarie
09/09/2025, 01:38:12 AM

As an automotive enthusiast, I must say the core of the Oshan X7 is its Blue Whale series 1.5T turbocharged engine. With a displacement of 1.5 liters and direct injection technology, it delivers 178 horsepower and a peak torque of 265 Nm. During test drives, I found it responsive at city starts, powerful in mid-range acceleration, and stable at high-speed cruising. Paired with a 7-speed dual-clutch transmission, the gear shifts are smooth, and fuel consumption is well-controlled, averaging 7-8 liters per 100 km in combined conditions—slightly more economical than the Haval H6 I tested. Engine noise insulation is decent, though wind noise at high speeds tends to overshadow the engine sound. Technically, it features DVVT (dual variable valve timing) to enhance intake and exhaust efficiency, making the overall design balanced and reliable. Maintenance costs are affordable, requiring only 92-octane gasoline, with convenient servicing and inexpensive parts. Owners are advised to regularly check spark plugs and fuel lines to ensure long-term durability.

Was this review help?
5
Share
Expand All
SanEva
10/23/2025, 02:29:26 AM

As an average family user, I've been driving the Oshan X7 for over a year and find its engine performance quite practical. Equipped with a 1.5T engine, it offers quick starts for daily commutes, with early turbo engagement that avoids sluggishness in traffic. Fuel economy is impressive, averaging 8L/100km in the city and dropping to around 7L on highways, making it more economical than peers. Its spacious interior and ample power make climbing hills with family effortless. The HVAC system responds quickly, with fast-cooling AC in summer. Maintenance is simple and affordable, with oil changes costing just over 400 yuan. The engine has proven reliable with no issues, though it gets slightly louder during hard acceleration—a minor trade-off. Overall, it's well-suited for urban living.

Was this review help?
6
Share
Expand All
LeRose
12/06/2025, 01:53:07 AM

As a long-term owner, my Oshan X7 engine has proven to be highly durable. The Blue Whale 1.5T engine has operated flawlessly for over three years with only routine maintenance required. Its simple structure makes maintenance hassle-free, excellent heat dissipation prevents overheating, and compatibility with 92-octane gasoline saves costs. The tidy engine layout facilitates self-inspection and maintenance. Having undertaken multiple long-distance trips, it delivers stable and reliable power even after 5 hours of continuous driving. Rarely have I heard of friends encountering issues with the same model, making it highly recommended for users prioritizing durability.

Was this review help?
10
Share
Expand All
VonEverly
01/26/2026, 03:12:26 AM

From an economic perspective, the Oshan X7 engine is quite cost-effective. The Blue Whale 1.5T engine offers low purchase costs and high fuel efficiency. Driving 20,000 kilometers a year, the combined expenses for fuel and maintenance are less than 10,000 yuan, with affordable insurance and abundant spare parts. Its cost-performance ratio far surpasses that of naturally aspirated engines in the same class, such as the Geely Binyue's 1.5T. Its reliability ensures stable residual value for used cars, and it meets environmental standards, making annual inspections hassle-free. The maintenance costs are low, and its practicality is strong.

Was this review help?
7
Share
Expand All
NathanDella
04/22/2026, 01:36:50 AM

Looking at automotive market trends, the Changan Oshan X7's 1.5T engine represents the progress of Chinese brands. The Blue Whale series combines turbocharging and direct injection technology, delivering 178 horsepower with high cost-performance, rivaling joint-venture brands. Fuel consumption controlled below 7 liters aligns with environmental trends, meeting China VI-B emission standards. User feedback highlights smooth power delivery, reliability, and durability, making it ideal for families. During the transition to electrification, this efficient engine remains popular.

Was this review help?
18
Share
Expand All
More Q&A

What does the National III standard refer to?

So-called National III standard refers to China's third-stage vehicle emission standards. The National III emission standard primarily specifies: HC emission values below 0.2g/km, CO emission values below 2.3g/km, NOx emission values below 0.15g/km, with no PM requirements. Relevant information about vehicle emission standards is as follows: 1. Introduction: Vehicle emission standards regulate the content of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). 2. Implementation status: Starting from January 1, 2004, Beijing upgraded its vehicle emission standards from Euro I to Euro II, and by 2008, officially implemented the Euro III standard.
107
Share

Where is the memory card located in a dash cam?

The memory card slot of a dash cam is usually located on the side of the device, typically marked with 'Micro' on a black SD card. The exact position varies depending on the product model and type. For rearview mirror-style dash cams, the card slot is generally positioned on the upper rear side of the device, while for card-style or screenless dash cams, it is usually found on the left or right side. Dash cams can be categorized based on vehicle type and functionality into: high-definition dash cams, mini dash cams, night vision dash cams, wide-angle dash cams, dual-lens dash cams, multifunctional all-in-one devices, and glasses-style multifunctional dash cams. A good dash cam should have excellent video clarity and nighttime recording capability. High-definition quality is determined by the main control chip of the dash cam, so users should pay attention to the image processing solution of the main control chip. Additionally, the dash cam must have sufficient storage space to enable long-duration effective recording. The required memory size generally depends on the video resolution and the recording storage capacity of the camera.
104
Share

What is the tire size for the Elantra?

The Elantra comes with two tire specifications: 225/45R17 and 205/55R16. In 225/45R17, the first number 225 represents the tire width of 225MM, 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, and 17 denotes the rim diameter of 17 inches. The letter "R" in the middle stands for radial tire. In 205/55R16, the first number 205 represents the tire width of 205MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 denotes the rim diameter of 16 inches. The letter "R" in the middle stands for radial tire. The Elantra's tires are from the Kumho brand, and the spare tire is a non-full-size specification. The seventh-generation Elantra's tire size is 225/45/R17, and the original tires are Nexen Npriz-CX. Nexen Tire was founded in 1942 and successfully produced Korea's first automotive tires in 1956. Since 2012, it has been supplying original tires to global automakers, including Porsche, Volkswagen, General Motors, Skoda, Hyundai, Kia, Renault, FCA, Beijing New Energy Automobile, Suzuki, and many others. For the seventh-generation Elantra's tires, the following points should be noted during daily use: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread is worn flat, it loses its ability to drain water and prevent skidding, significantly reducing the car's performance. Even small cracks can pose a risk of blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool the tires. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging against the road. If you wish to replace the tires yourself, follow these steps: Retrieve the spare tire and jack. Place the jack under the vehicle's frame near the tire to be replaced, ensuring it contacts the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and ensure it is perpendicular to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not fully remove the nuts; just loosen them enough to eliminate resistance. Keeping the tire on the ground while loosening the nuts ensures the nuts turn, not the tire. Turn the nuts counterclockwise until they are loose. Repeat this for all lug nuts and then remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and hand-tighten them until all nuts are snug. The tire replacement is now complete. In addition to the size, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F."
115
Share

What does it mean when the EPC light is on and the JAC truck cannot move?

When the EPC indicator light on a JAC truck remains constantly illuminated, it indicates a malfunction in the engine or electronic systems, and the vehicle should not be driven further. Immediate contact with a repair shop is necessary. Of course, if the engine stalls due to improper operation, the indicator light may also illuminate. If the light turns off after restarting the engine, it means everything is functioning normally. When the EPC light is on in a JAC truck, it signifies a vehicle malfunction, and the driver should stop to inspect the issue. Possible causes of the fault include: 1. The EPC light may illuminate due to a dirty throttle body. 2. Additionally, a faulty brake light switch can also lead to this phenomenon. 3. Another potential cause is a leak in the intake system, which, when detected by the engine control unit, will trigger the EPC warning light. 4. Leaks in the crankcase ventilation system can also result in this fault. It is recommended to visit an authorized 4S dealership for a comprehensive computer diagnostic test.
113
Share

Yaris L Maintenance Schedule Overview?

Toyota Yaris L's first maintenance for a new car is at 5,000 kilometers or 3 months, whichever comes first. After the first maintenance, the service interval is every 5,000 kilometers. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life. Below is an introduction to the Yaris L: 1. Exterior: The new Yaris L maintains the original oversized body dimensions and the bold front grille design style. With the goal of "enhancing a distinctive image and reinforcing iconic appearance," it features a newly designed bumper and light clusters exclusive to the Chinese market, along with added details like daytime running lights. The rear light cluster's light source layout has been revamped, and the introduction of LED lighting also reduces the vehicle's energy consumption. 2. Safety Features: The new Yaris L builds upon the existing ABS+BA (Anti-lock Braking System/Brake Assist) by adding VSC (Vehicle Stability Control) and TRC (Traction Control) systems. These systems continuously monitor the operation of all four wheels, selectively braking wheels that slip on wet or snowy roads, and limiting engine output to ensure the vehicle follows the intended path, preventing loss of control or skidding.
110
Share

What causes the Chery Tiggo to have sluggish acceleration and a muffled sound?

Reasons for the Tiggo engine's sluggish acceleration include: 1. Carbon deposits: Carbon deposits can occur in the cylinders, throttle body, spark plugs, and intake system. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, and ultimately, the engine's power is reduced, resulting in sluggish acceleration and a muffled sound. 2. Fuel system issues: Using an incompatible fuel grade can lead to reduced power output. Alternatively, if the fuel tank vent is blocked, or if the fuel tank switch, fuel filter, or fuel lines between the tank and carburetor are partially clogged, the required fuel supply may not be met, causing a lean air-fuel mixture and sluggish engine acceleration. 3. Intake problems: If the air filter is not cleaned regularly and becomes clogged, insufficient air intake can result in an overly rich air-fuel mixture, reducing engine power. For vehicles equipped with a turbocharger, if the turbocharging system malfunctions, the engine may remain sluggish and fail to deliver full power even when the throttle is applied. 4. Engine overheating: Engine overheating can impair lubrication, increase mechanical wear, and reduce engine power, leading to sluggish acceleration.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.