What is the curb weight of the Haval H6?

What is the function of the anti-slip mode?

Anti-slip mode, also known as snow mode, is designed to ensure the vehicle has smoother and lower torque output, reducing the likelihood of tire slippage. Below are detailed introductions of driving modes: 1. Eco Mode: In this mode, both the fuel injection volume and transmission control module are managed by the computer, which adjusts to the most fuel-efficient driving style. This mode offers the lowest fuel consumption but also the least power. 2. Comfort Mode: This mode balances power and fuel efficiency. In this setting, both power output and air conditioning are optimized for energy saving, making it most suitable for daily driving. 3. Sport Mode: Generally used in road conditions requiring higher power. When switched to this mode, the battery's energy output increases significantly in a short time, and the traction control system and stability control system reduce intervention in driving operations. This results in quicker vehicle response and more noticeable steering operations. This mode has the highest fuel consumption but provides the most power. 4. Snow Mode: This mode primarily works by suppressing the vehicle's torque to reduce wheel slippage and spinning when driving on snow.

7

5

Share

What is the use of a car 12V power supply?

Here are the specific uses of the 12V power supply in a car: 1. Connectable devices: The 12V power supply in the car can be used to connect some electrical devices such as car phones, portable DVDs, and mobile phone chargers, making it very convenient to use. 2. Car power interface: The 12V power supply in the car is an interface that provides power to external devices, with an output voltage of 12V, and the current varies depending on the vehicle model. Below is some extended information about car power supplies: 1. Function of the car power supply: The 12V power supply is primarily designed for the cigarette lighter. When the cigarette lighter is removed and an adapter is plugged in, it can charge mobile phones and power components such as dash cams. 2. Other car electrical appliances: As people's demands for car usage increase, car electronics manufacturers have introduced products like car vacuum cleaners, car refrigerators, and even car rice cookers to meet consumer needs. All these products can be powered by the car's 12V power supply.

2

4

Share

Is it necessary to install side steps?

It is necessary to install side steps on a car. Here is an introduction to the related content of car side steps: 1: The function of side steps: Some cars have a higher body, and installing steps makes it easier for passengers to get on and off. 2. Enhance visual effect: It raises the visual focus of the car body, making the whole vehicle look high-end and elegant, and also protects the car from scratches and impacts from the side. Below is extended information about side steps: 1. Introduction: Car side steps, as the name suggests, are installed on the side of the car to facilitate passengers getting on and off, commonly seen in SUV and MPV models. 2. Electric steps: When the car door is opened, the electric step automatically extends and stops when it reaches the limit position. When the car door is closed, the electric step automatically retracts back under the car.

3

5

Share

What Causes Unstable Oil Pressure?

The causes of unstable engine oil pressure are: 1. Malfunction of the oil pump; 2. Failure of the regulating valve or return valve spring; 3. Insufficient oil in the oil pan; 4. Improper assembly or sticking of the pressure relief valve. Symptoms of insufficient engine oil pressure include: 1. Lack of power during acceleration; 2. Frequent stalling; 3. Engine knocking. Methods to address unstable engine oil pressure are: 1. Check the oil dipstick to see if the oil level is sufficient and whether there is gasoline or water in the oil; 2. Inspect all parts of the engine for oil leaks while it is running; 3. Check if the oil pressure sensor and oil pressure gauge are functioning properly by grounding the sensor wire; 4. Examine the lubrication system oil pressure by removing the sensor; 5. Remove the oil pan and clean the oil pickup screen and oil filter.

8

4

Share

How long can a flooded car be started after stalling?

Whether a vehicle can be started after wading through water depends on the extent of water exposure. Here are the specific details: 1. No damage: If the electronic system and engine of the car are not damaged after wading through water, it can be started immediately. 2. Severe water exposure: If the engine stalls due to water exposure, do not attempt to restart the engine. Below is extended information about water-damaged vehicles: 1. Definition of a water-damaged vehicle: A vehicle that has begun to accumulate water inside, with internal components damaged due to water exposure, and there are corresponding flood levels for water-damaged vehicles. 2. Classification of flood levels for water-damaged vehicles: Flood level 1 is when water just reaches the vehicle's chassis, flood level 2 is when water reaches halfway up the wheels, flood level 3 is when water almost completely submerges the tires, flood level 4 is when water reaches the engine hood, flood level 5 is when water completely submerges the engine hood, and flood level 6 is when water submerges the roof.

11

4

Share

Which brand does Feidie Auto belong to?

Feidie Auto is an independent Chinese automotive brand, established in 1995 with its headquarters located in Zhejiang Province. The company primarily manufactures commercial vehicles, special-purpose vehicles, and new energy vehicles. However, as of August 2019, Feidie Auto's vehicle production has essentially been completely suspended. More details are as follows: 1. Sub-brands: Feidie Auto has two commercial vehicle brands under its umbrella, namely 'Aochi' and 'Ditu'. The company's main products include light buses, light trucks, SUVs, asphalt distributors, sanitation machinery, and other series. Feidie products enjoy high recognition in the industry due to their strong technical capabilities, advanced production processes, comprehensive testing methods, innovative styling design, reliable product quality, and complete pre-sales, in-sales, and after-sales services. 2. Technical Features: Feidie Auto has established automated stamping, welding, painting, and assembly production lines. It has achieved computer-integrated manufacturing for cover molds and possesses manufacturing capabilities for frames, axles, and transmission systems. The company has mastered the design and manufacturing technologies for core automotive components.

16

2

Share

What is the curb weight of the Haval H6?

What is the function of the anti-slip mode?

What is the use of a car 12V power supply?

Is it necessary to install side steps?

What Causes Unstable Oil Pressure?

How long can a flooded car be started after stalling?

Which brand does Feidie Auto belong to?

Which Cars Have Clocks Inside?

Why does the electronic parking brake make a clicking sound when engaged?

What are the causes of insufficient fuel supply to the engine?

What to Do When Gear Shifting and Accelerator Malfunction?