···
Log in / Register

What is the actual fuel consumption of the Luxgen 7 SUV?

3 Answers
LaElena
09/07/25 4:45am
2.2t models have a fuel consumption of approximately 13 liters per 100 kilometers, while 2.0t models consume about 11.9 liters per 100 kilometers. The Luxgen 7 SUV is equipped with two engine options: a 2.0-liter turbocharged engine and a 2.2-liter turbocharged engine. More details are as follows: 1. The 2.0-liter turbocharged engine delivers 163 horsepower and a maximum torque of 250 Nm. This engine reaches its peak power at 5,200 rpm and its maximum torque between 2,500 and 3,000 rpm. It features multi-point fuel injection technology and an aluminum alloy cylinder head and block. It is paired with a 5-speed automatic transmission. 2. The 2.2-liter turbocharged engine produces 201 horsepower and a maximum torque of 295 Nm. Its peak power is achieved between 5,000 and 5,500 rpm, with maximum torque available from 2,400 to 4,000 rpm. This engine also utilizes multi-point fuel injection and an aluminum alloy cylinder head and block. It is matched with a 6-speed automatic transmission.
Was this review help?
5
5
Share
AubreeLynn
09/19/25 4:08am
As a regular car owner, I've driven the Luxgen U7 SUV for over two years, and the actual fuel consumption is quite high. In city driving, it averages above 13 liters per 100 km, and can easily rise to 15 liters when stuck in traffic with frequent stops. Highway driving is slightly better, dropping to around 11 liters per 100 km at 90 km/h. The car is spacious and comfortable, but fuel costs hundreds more per month than expected. I recommend avoiding sudden acceleration, using cruise control more often, and keeping up with regular maintenance like oil and air filter changes to save some fuel. Also, using AC in summer increases consumption, and cold starts in winter are fuel-heavy, so plan routes to avoid congestion. Check tire pressure before long trips, as both under- and over-inflation waste fuel. This 2-ton vehicle has strong power but is a gas guzzler—calculate daily costs carefully before buying.
Was this review help?
19
0
Share
Expand All
MatteoAnn
11/02/25 4:29am
As a car enthusiast who enjoys tinkering, I found that the official fuel consumption of the Luxgen U7 is stated as 11 liters, but in actual driving, it can reach 13-14 liters per 100 kilometers. I personally replaced the spark plugs and cleaned the fuel injectors, which reduced the fuel consumption by nearly 1 liter. Maintaining the correct tire pressure is crucial, and avoiding speeding during highway cruising helps since high wind resistance significantly increases fuel consumption. Adding fuel system cleaner can improve engine efficiency, and regularly changing the air filter also helps. Reducing unnecessary weight in the car by avoiding clutter can save fuel. The engine tuning of this car isn't the most advanced, but with minor adjustments, the combined fuel consumption can be kept under 12 liters. Driving habits are key—avoid frequent stops and starts, and using the eco-mode in city driving is more fuel-efficient. Try these DIY tips to save money and extend the lifespan of your car components.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

How to Quickly Remove Frost from Car Windows?

Methods to quickly remove frost from car windows are as follows: 1. Use the built-in defroster: First, turn on the air conditioning button inside the car, switch the air circulation mode to external circulation, and wait a moment for the frost to disappear. However, this method has a drawback: using the air conditioning button in winter will inevitably increase fuel consumption, and switching to external circulation will cause the temperature inside the car to drop suddenly, making it unsuitable for long drives. 2. Open the windows: The fastest and most effective emergency method is to roll down the windows, allowing the wind inside and outside the car to circulate for a minute or two, and the frost will naturally disappear. This saves time and does not increase fuel consumption. 3. Turn on the heater: Simply turn on the heater inside the car and adjust the airflow direction to blow directly onto the windows. The heater can effectively dry the air inside the car, and once the air is dry, frost will not form on the windows. However, this method also has a drawback: when starting the car in winter, the water temperature inside the car has not yet reached the normal level, so the air blown out at this time is not warm.
12
0
Share

Is the Shadow Leopard a joint venture car?

Shadow Leopard is a domestic car. Here are the extended details: Body parameters: Taking the Shadow Leopard 2021 270T Shadow Leopard J10 Flyer Edition as an example, its body length, width, and height are 4700mm, 1850mm, and 1432mm respectively, with a wheelbase of 2736mm. Power aspects: It is equipped with a 1.5T turbocharged engine, matched with a 7-speed wet dual-clutch transmission, and the body structure is a 4-door 5-seater sedan. The maximum horsepower of the Shadow Leopard 2021 270T Shadow Leopard J10 Flyer Edition is 177ps, the maximum power is 130kw, the maximum torque is 270nm, the front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
18
0
Share

Reasons for White Smoke from Diesel Engines?

Here are the detailed explanations for the causes of white smoke from diesel engines: 1. Light white smoke, water in diesel fuel: Diesel fuel needs to settle for 24 hours before use. When refueling, avoid inserting the fuel pump to the bottom of the diesel barrel. Damaged or missing fuel tank caps should be promptly replaced. Poor sealing of the cylinder head gasket or cracks in the bottom of the cylinder head can cause coolant from the water jacket to leak into the cylinder, forming water vapor and resulting in white smoke. Locate the leakage point and repair or replace the relevant parts. 2. White smoke: When the temperature is too low, some diesel fuel may not ignite and burn, producing white smoke. This white smoke will disappear on its own as the engine temperature rises, which is a normal condition and does not require troubleshooting. Low injection pressure, severe dripping of the injector, or excessively low injector pressure adjustment can cause some diesel fuel mist to fail to ignite and burn in the combustion chamber, resulting in white smoke.
1
4
Share

The Difference Between Direct Injection and Multi-Point Fuel Injection

Here are the differences between direct injection and multi-point fuel injection: 1. Fuel Consumption: Direct injection has lower fuel consumption, while multi-point fuel injection has lower requirements for fuel quality. 2. Components: Both direct injection and multi-point fuel injection have complex structures and higher costs. 3. Operation: In a direct injection engine, high-pressure fuel is injected into the combustion chamber in a fine mist. As it evaporates, it absorbs heat, cooling the cylinder and thereby reducing emissions. Multi-point fuel injection involves injectors installed on the intake pipe of each cylinder, with fuel sprayed into the cylinder from multiple locations. 4. Technical Requirements: Direct injection technology has higher requirements, with the main technical challenge being the achievement of stratified combustion. While multi-point fuel injection improves upon the uneven mixture distribution issue of single-point injection, it does not enhance fuel atomization or air-fuel mixing.
9
0
Share

What is the lifespan of the dry dual-clutch in Jetour X70?

The lifespan of a dry dual-clutch is about ten years, and the clutch plates generally need to be replaced after approximately ten years of use. Strictly speaking, there is no precise, standard, or uniform answer to this question because the number of years a dry dual-clutch can last is influenced by too many objective factors. For example, daily driving conditions and driving habits can significantly impact the lifespan of a dry dual-clutch. Methods to extend the clutch's lifespan include using the clutch decisively. The clutch is primarily used for gear shifting and starting/stopping. When shifting gears, it should be done promptly and decisively without hesitation. Especially in low gears, releasing the clutch should be done quickly at first and then slowed down to avoid excessive impact on the clutch, which is detrimental to its lifespan. The function of the clutch is to gradually increase the driving force of the car, allowing for a smooth start; to temporarily separate the engine and transmission for gear shifting; to prevent overload in the transmission system; and to reduce torsional vibration impacts from the engine, thereby extending the lifespan of the transmission gears. Symptoms of a failing clutch include clutch slippage: when starting the car in a low gear, the car fails to start or has difficulty starting after releasing the clutch pedal; incomplete clutch disengagement: even when the clutch pedal is fully depressed, the power between the driving and driven plates of the clutch cannot be completely cut off, leading to difficulty in shifting gears, gear grinding, inability to stop, or clutch overheating; clutch shuddering; and abnormal clutch noises.
15
0
Share

What to Do If a Piece of Paint is Scratched Off the Car?

Solutions for a scratched-off piece of paint on the car: 1. You can choose to use wrapped sandpaper to smooth the scratched area until there is no uneven feeling compared to the surrounding paint when touched by hand; 2. Start spraying paint from a certain distance from the scratch, which can make the car's paint more even; 3. When spraying, pay attention to spraying back and forth, avoiding spraying heavily in one spot until the color covers the black area, ensuring the repaired paint color closely matches the car's original color. If it's just a minor scratch on the body, meaning only the surface layer is affected and not deep, this can actually be repaired by waxing.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.