What is the actual fuel consumption of the Jetour X70?

Where is the open circuit in the driver-side detonator circuit located?

An open circuit in the driver-side detonator circuit is generally located in front of the gear lever or beneath it. Relevant information about the four stages of the side airbag detonator is as follows: 1. Stage 1: The car crashes, reaching the detonation limit of the airbag system. The sensor takes 10ms from detecting the collision to activating the current. The detonator ignites the gas generator of the airbag, while the driver remains in an upright position. 2. Stage 2: The gas generator fully inflates the airbag within 30ms. After 40ms of the crash (at a speed of 50km/h), the driver's body begins to move forward. Since the seatbelt is diagonally fastened to the driver, it stretches as the driver moves forward, absorbing part of the impact energy generated during the crash. 3. Stage 3: 60ms after the car crash, the driver's head and upper body press against the airbag. The exhaust port behind the airbag allows the gas pressure to escape evenly under pressure. 4. Stage 4: 110ms after the car crash, the driver moves back into the seat. Most of the gas has escaped from the airbag, and the front view becomes clear again.

14

4

Share

What Causes the Noise When Braking in a BMW?

BMW braking noise may be caused by worn brake pads. Here is relevant information: 1. Background: BMW cars refer to vehicles produced by Bayerische Motoren Werke AG (abbreviated as BMW), with main series models including 1, 2, 3, 4, 5, 6, 7, and 8. BMW is renowned worldwide for producing luxury cars, motorcycles, and high-performance engines. 2. Logo Meaning: The BMW emblem features a double-circle design with the 'BMW' inscription above the circles. The entire logo resembles the blue sky, white clouds, and a continuously rotating propeller, symbolizing the company's long history and its consistent mission to meet customer desires with the latest technology and advanced concepts. It reflects BMW's dynamic spirit and continuous innovation, showcasing the superior quality, technological leadership, and global presence of BMW cars.

19

5

Share

What are the causes of steering shaft noise?

Steering shaft noise may be caused by lack of lubrication in the steering column, friction, and other reasons. Here are specific explanations: 1. Avoid turning the steering wheel while stationary: Try to steer only after the vehicle is in motion. Turning the steering wheel while stationary should only be used occasionally in special circumstances for maneuvering out of parking spaces. 2. Return the steering wheel to the center position: When the vehicle is parked, the steering wheel should be returned to the center position to avoid placing load on the suspension system and tires. 3. Make turns in one motion: When making a U-turn, try to avoid turning the steering wheel to the extreme lock position.

19

2

Share

What are the differences between the 2016 and 2018 Haval H5 models?

The 2016 model is more fuel-efficient than the 2018 model. Here is an introduction about Haval: 1. Introduction: Great Wall Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, mainly focusing on SUV models, operates in parallel with the Great Wall brand, using an independent logo, and has its own product development, production, and service systems, primarily engaged in SUV production and sales. 2. Series: It includes two series, the H series and the F series. Among the SUV sales of the Great Wall brand, Haval accounts for the majority. 3. Sub-brands: Haval H2s, Haval H2, Haval H4, Haval H5, Haval H6, Haval H6 Coupe, Haval H7, Haval H9.

17

2

Share

What is the valve clearance for Weichai P10?

For the Weichai P10 engine, the intake valve clearance is 0.35-0.40mm, and the exhaust valve clearance is 0.45-0.50mm. Relevant information about valves is as follows: 1. Function: Valves are specifically responsible for introducing air into the engine and expelling exhaust gases after combustion. Structurally, they are divided into intake valves and exhaust valves. The intake valve draws air into the engine to mix with fuel for combustion, while the exhaust valve expels the burned gases and dissipates heat. 2. Composition: A valve consists of a valve head and a stem. The valve head operates at high temperatures (intake valve: 570~670K, exhaust valve: 1050~1200K) and withstands gas pressure, valve spring force, and inertial forces from transmission components. With poor lubrication and cooling conditions, valves must possess sufficient strength, stiffness, heat resistance, and wear resistance. Intake valves are typically made of alloy steel (chromium steel, nickel-chromium steel), while exhaust valves use heat-resistant alloys (silicon-chromium steel). To save on heat-resistant alloys, sometimes the exhaust valve head is made of heat-resistant alloy, and the stem is made of chromium steel, with the two parts welded together. Valve head shapes include flat-top, spherical-top, and tulip-top. Flat-top valves are commonly used due to their simple structure, ease of manufacturing, small heat absorption area, light weight, and suitability for both intake and exhaust valves. Spherical-top valves are suitable for exhaust valves, offering high strength, low exhaust resistance, and effective exhaust gas removal, but they have a large heat-absorbing area, greater mass and inertia, and complex manufacturing. Tulip-top valves have a streamlined shape that reduces intake resistance, but their large heat-absorbing area makes them suitable only for intake valves.

15

2

Share

What are the reasons for the ABS warning light being on in an old Jetta?

There are various states of the ABS light being on, with different causes and solutions for each state as follows: State 1: ABS warning light stays on (most common). Reason 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Reason 2: Poor signal due to loose connections in the system wiring or poor contact of the ABS relay, causing system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently turns on but goes off when accelerating. Reason: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and voltage rises, the ABS warning light turns off. The ABS system's power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Reason: Poor grounding contact of the ABS hydraulic valve body; poor electrical connection of the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen the grounding screw of the hydraulic valve body, then retighten it, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light turns on during high-speed driving. Reason: At high speeds, the ABS computer detects a significant difference between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently turns on. Reason: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: Start the engine, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete self-setting; replace the brake light switch. When the ABS warning light is on, it is advised not to continue driving. The illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

11

3

Share

What is the actual fuel consumption of the Jetour X70?

Where is the open circuit in the driver-side detonator circuit located?

What Causes the Noise When Braking in a BMW?

What are the causes of steering shaft noise?

What are the differences between the 2016 and 2018 Haval H5 models?

What is the valve clearance for Weichai P10?

What are the reasons for the ABS warning light being on in an old Jetta?

What is the issue when the steering wheel is slightly tilted to the right?

Introduction to the Steering Wheel Buttons of the Haval Chitu

Is the Wuling Hongguang Mini a four-seater?

Should the Audi RS5 use 95 or 98 octane gasoline?