···
Log in / Register

What grade of gasoline should the Volkswagen Tayron use?

3 Answers
CarlosRose
08/31/25 2:56am
The Volkswagen Tayron should use 95-octane gasoline, which has a higher anti-knock property than 92-octane gasoline but lower than 97-octane gasoline. Taking the 2019 Volkswagen Tayron as an example, it belongs to the mid-size SUV category with the following dimensions: length 4589mm, width 1860mm, height 1660mm, wheelbase 2731mm, front track 1576mm, rear track 1575mm, fuel tank capacity 60 liters, and trunk capacity 506 liters. The 2019 Volkswagen Tayron is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
Was this review help?
12
5
Share
SanJonathan
09/12/25 6:25am
My Volkswagen Tayron has been running for almost three years, and I usually fill it with 95-octane gasoline. The car's manual recommends 95-octane because the engine is turbocharged. If you use 92-octane fuel, the car is prone to abnormal noises and may even experience knocking, which can damage the engine over time. I once tried saving money by using 92-octane, but the noise increased, acceleration became sluggish, and fuel consumption even went up a bit—totally not worth it. I suggest owners stick with 95-octane and avoid experimenting with other grades. If you can't find a gas station occasionally, you can use 92-octane as an emergency measure at most, but you should drive to a check-up immediately afterward. By the way, the cleanliness is also better, and regular maintenance gives more peace of mind. Remember, treat your car well, and it will run longer and smoother.
Was this review help?
15
0
Share
Expand All
LaMason
10/26/25 7:13am
For those who frequently deal with this type of vehicle, using 95-octane gasoline for the Volkswagen Tayron is the safest choice. The engine design requires high-octane fuel to prevent knocking, carbon buildup, and premature wear. Check the fuel cap or manual, as they usually recommend 95-octane. Using the wrong fuel grade may trigger a warning light, leading to costly and time-consuming repairs. It's advisable to develop the habit of refueling at reliable gas stations for more stable fuel quality. Long-term use of 95-octane not only ensures engine health but also maintains fuel efficiency, saving money in the long run. If you accidentally fill up with 92-octane, don't panic—drive gently and replace it as soon as possible to minimize damage. In short, being meticulous with your car is always beneficial.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

Is a Three-Month-Old Car Considered a Stock Vehicle?

A car that has been in stock for nearly three months is not considered a stock vehicle. Vehicles stored for up to three months are classified as normal stock, while new cars stored for more than three months can be defined as stock vehicle models. Methods to identify a stock vehicle: Check the odometer: Generally, a car with mileage under 50 kilometers is considered normal. A new car inevitably accumulates some mileage during transportation from the factory. If the mileage exceeds 100 kilometers, it indicates the car might have been used for external exhibitions or test drive events. Inspect the exterior: Check rubber materials like tires and sealing strips. A normal new car should have undamaged tire walls, and ideally, the tire hairs on both front and rear tires should still be intact. Check the production nameplate: Usually located below the B-pillar on the right side (passenger side) of the vehicle, the nameplate displays the car's manufacturing date, engine parameters, and other information. It can be easily checked. Any car older than three months is considered a stock vehicle.
8
4
Share

Which is more fuel-efficient, Jetta or Santana?

Jetta is more fuel-efficient, with a combined cycle fuel consumption of 5.7L/100km, while Santana has a combined cycle fuel consumption of 6.2L/100km. More details about Jetta are as follows: 1. The new Jetta's 1.5L engine has a maximum power of 81KW and a maximum torque of 150Nm. The engine adopts advanced technologies such as Freilauf generator, dual VVT timing adjustment system, integrated intake/exhaust camshaft in the cylinder head cover, and continuously adjustable oil pump, effectively reducing fuel consumption while further improving emissions and noise. 2. Jetta's CO2 emissions are reduced to 64g/km, and noise is reduced by 1.5dBA. The AQ160 automatic transmission matched with the 1.5L MPI engine also adds an ECO-Mode, making gear shifting smoother. The automatic transmission model achieves the same fuel consumption level as the manual transmission model, with a combined cycle fuel consumption of only 5.7L/100km.
11
2
Share

Does the Forte need to warm up?

Forte needs to warm up. After starting the car, wait for 2 minutes before driving. When the engine is first started, the coolant temperature will be lower than normal. Only after the coolant temperature returns to normal can you gradually accelerate. Driving at high RPMs with a cold engine in low-temperature conditions can be harmful, as the engine oil has higher viscosity, poorer fluidity, and reduced lubrication capability, leading to more severe wear between mechanical components compared to normal operating conditions. In terms of safety features, the Forte enhances front and rear collision absorption, and comes equipped with 6 airbags, seatbelt pre-tensioners, automatic door locks, four-wheel disc brakes, and a combination of ABS with EBD. For powertrain, the Forte offers a 5-speed manual transmission and a 4-speed automatic transmission with manual mode. The manual transmission shifts very precisely, while the automatic transmission paired with the 2.0L engine lacks a sense of acceleration at high speeds.
12
4
Share

Is it good for the engine to keep the air conditioner on while the car is parked?

Keeping the air conditioner on while the car is parked has a slight impact on the car's engine, as it can easily lead to carbon buildup, causing the exhaust pipe tailpipe to be covered with carbon deposits, and it also increases fuel consumption. Here is more information about car air conditioners: 1. The car air conditioner is a very important comfort feature in a vehicle. It can provide both cooling and heating. When cooling, the compressor clutch engages, and the engine drives the compressor to operate. The compressor continuously compresses the refrigerant and delivers it to the evaporator. 2. The refrigerant expands and absorbs heat in the evaporator, cooling it. The cooled evaporator then cools the air blown by the blower, allowing the car air conditioner to blow cold air. The heating principle of the car air conditioner is even simpler. When heating, the high-temperature antifreeze from the engine enters the heater core, and the air blown by the blower passes through the heater core, allowing the car air conditioner to blow warm air. 3. The car air conditioner requires regular refrigerant top-ups. If refrigerant is not added for a long time, it will slow down the cooling speed and reduce the cooling effect. Most car air conditioners use R134a refrigerant.
11
5
Share

What does ACC mean when displayed on a vehicle?

When a vehicle displays ACC, it refers to the ignition switch position, and the ACC status indicates the state of the ignition switch. Typically, car keys have four positions: OFF, ACC, ON, and START. However, most Volkswagen models, such as Hongqi and Audi, have three positions, meaning they lack the ACC position. The functions of each position are as follows: 1. The OFF position turns the vehicle off; 2. The ACC position allows power to some electrical components without starting the engine. When the car is being started, a strong current is required, so the ACC stops supplying power temporarily and resumes after the engine starts; 3. The ON position powers all electrical components in the vehicle; 4. The START position is a self-resetting switch that automatically returns to the ON position after the engine starts.
9
2
Share

How to reset the maintenance light on the VV5?

Steps to reset the maintenance light on the VV5: 1. Press the trip reset button on the dashboard, and the trip meter will reset; 2. Continue pressing the trip reset button for 60 seconds, at which point the dashboard display will show 5000 kilometers, indicating that the maintenance light has been successfully reset. The first maintenance interval for the VV5 is 5000 kilometers, with subsequent maintenance required every 7500 kilometers. In terms of exterior design, the VV5 features a bold and masculine large grille, a hexagonal horizontal mesh grille design, elongated headlights, and chrome accents on the front bumper. The dimensions of the VV5 are 4462 mm in length, 1857 mm in width, 1638 mm in height, with a wheelbase of 2680 mm.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.