···
Log in / Register

What does the A2E driver's license mean?

1Answers
Graham
09/05/2025, 03:14:24 AM

The A2E driver's license is a combination of the A2 license and the E license, allowing the holder to drive vehicles permitted under both the A2 and E licenses, including motorcycles. Vehicles that can be driven include: two-wheeled motorcycles, heavy-duty tractors, medium-sized trailers/semi-trailers, B1 (medium-sized buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed cargo vehicles), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). The A2 license alone does not permit driving motorcycles. Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks must undergo an inspection at the traffic management department of the public security authority within 30 days after each scoring cycle ends. However, if there is no scoring record during a scoring cycle, the inspection is exempted for that cycle. Drivers holding licenses not covered by the third paragraph of this section must undergo an inspection within 30 days after the scoring cycle ends if they are equally or more responsible for a fatal traffic accident and their driver's license has not been revoked. According to the appendix of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the classification standards for driver's licenses include 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, and P. The Ministry of Public Security's "Regulations" further subdivide licenses into 15 categories, with new licenses issued upon annual inspection or verification. C1 driver's license: Many people believe the C1 license only permits driving small vehicles with up to 7 seats. However, it actually allows driving small vehicles with up to 9 seats and a body length not exceeding 6 meters, such as Jinbei and Ruifeng models. The C1 license also permits driving C2 (small automatic transmission cars), C3 (low-speed cargo vehicles), and C4 (three-wheeled cars). C2 driver's license: The C2 license is also common and permits driving automatic transmission cars with up to 9 seats and a body length not exceeding 6 meters. Note that C2 license holders cannot drive manual transmission vehicles. B1 driver's license: The B1 license permits driving medium-sized buses, defined as vehicles not exceeding 6 meters in length with a rated passenger capacity of 10 to 19 people. Other permitted vehicles include C1, C2, C3, C4, and M (wheeled self-propelled machinery). The B1 license does not cover B2 vehicles. B2 driver's license: The B2 license permits driving heavy or medium-sized trucks or large, heavy, or medium-sized specialized operation vehicles. Heavy and medium-sized trucks are mainly freight vehicles, such as dump trucks commonly seen on roads. Other permitted vehicles include C1, C2, C3, C4, and M, similar to the B1 license. A1 driver's license: The A1 license permits driving large buses with over 20 passengers and passenger vehicles with a body length exceeding 6 meters. Other permitted vehicles include A3 (city buses), B1, B2, C1, C2, C3, C4, and M. A2 driver's license: The A2 license permits driving tractors, which can only be driven by A2 license holders (not even A1 holders). Other permitted vehicles include B1, B2, C1, C2, C3, C4, and M. A3 driver's license: The A3 license is unique, permitting driving city buses. Other permitted vehicles include C1, C2, C3, and C4. A3 license holders cannot drive B1 or B2 vehicles. Although buses and large passenger vehicles may look similar, A3 license holders cannot drive large passenger vehicles. The 16 categories of driver's licenses are classified based on the driving difficulty and safety requirements of different vehicle types. The existing A (large buses), B (large trucks), and C (small cars) licenses are further subdivided, with additions like D, E, F, M, N, and P. Under the new regulations, first-time applicants cannot apply for an A1 license (large buses). Eligible vehicles for first-time applicants include city buses, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Applicants in temporary residence can apply for C-series licenses (small cars, small automatic transmission cars, low-speed cargo vehicles, and three-wheeled cars) but not motorcycles. Holders of the newly added D license can drive ordinary three-wheeled motorcycles with an engine displacement over 50ml or a maximum design speed over 50km/h. E license holders can drive ordinary two-wheeled motorcycles with an engine displacement over 50ml or a maximum design speed over 50km/h. F license holders can drive light motorcycles with an engine displacement ≤ 50ml or a maximum design speed ≤ 50km/h. M license holders can drive wheeled self-propelled machinery, N license holders can drive trolleybuses, and P license holders can drive trams.

Was this review help?
115
Share
More Q&A

What is the tire model for Accord?

Honda Accord is equipped with Michelin Primacy tires, with specifications of 225/50R17 (tire width 225mm, aspect ratio 50%, wheel diameter 17 inches). These tires feature high quietness, comfort, and a durable appearance. Tires are one of the most important components of a vehicle, serving the following main functions: 1. Load-bearing function: Support the entire weight of the vehicle, withstand the load of the car, and transmit forces and moments in other directions; 2. Force transmission function: Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power, braking, and passability; work with the vehicle suspension to mitigate impacts during driving and dampen resulting vibrations; 3. Protective function: Prevent severe vibrations and early damage to vehicle components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
101
Share

What is the battery model of GAC Trumpchi GA3?

The battery model is Varta T5, with a rated voltage of 12V, 20-hour rate capacity of 55Ah, and cold cranking current of 530A. Battery maintenance precautions are as follows: Regularly start the car: If the battery is not used for a long time, it will slowly self-discharge until it is scrapped. Therefore, the car should be started at regular intervals to charge the battery. Charge in time: When the battery level is shown to be insufficient, it should be charged in time. The battery level can be reflected on the dashboard. Check the battery regularly: During daily driving, check whether the small holes on the battery cover are ventilated. If the small holes on the battery cover are blocked, the generated hydrogen and oxygen cannot be discharged, and when the electrolyte expands, it will break the battery shell and affect the battery life.
109
Share

Where is the Peugeot 308 air conditioning filter located?

The Peugeot 308 air filter is located on the right side of the car's engine compartment. Below is relevant information about the air conditioning filter: 1. Scope of application: The air filter is a type of filter. It is mainly used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. 2. Effects of unfiltered air: When the engine is operating, it needs to intake a large amount of air. If the air is not filtered, the suspended dust in the air will be drawn into the cylinders, accelerating the wear of the piston assembly and cylinders. Larger particles entering between the pistons and cylinders can cause severe "cylinder scoring," which is particularly serious in dry and sandy working environments. 3. Function: The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders.
120
Share

What Temperature Should the Car Air Conditioning Be Set To?

The car air conditioning should be set between 24 to 27 degrees Celsius. The functions of the air conditioning are: 1. Filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Keeping the air clean and preventing bacterial growth; 4. Preventing fogging on the windows; 5. Adjusting the cabin temperature. The maintenance methods for the air conditioning are: 1. Clean the air conditioning vents promptly; 2. Maintain the air conditioning condenser in a timely manner; 3. Clean or replace the air conditioning filter regularly. Precautions for using the air conditioning include: 1. Turn off the AC during startup and rapid acceleration; 2. Avoid setting the air conditioning temperature too low—a difference of 5 to 6 degrees between the inside and outside temperatures is sufficient; 3. Based on the principle that cold air sinks and warm air rises, when controlling the air conditioning vents, set them upward when cooling and downward when heating.
113
Share

What Are the Reasons for the Car Engine Oil Light to Illuminate?

There are several reasons why the car engine oil light illuminates: 1. Insufficient Engine Oil Level: It is necessary to check promptly. Use the dipstick to determine the remaining amount of engine oil. When checking the oil level, ensure the car is parked on a flat surface. After letting it sit for about ten minutes, pull out the dipstick to check the remaining oil level. If it is below the lower limit mark on the dipstick, you need to add engine oil. 2. Overheating Engine: With prolonged use, the cooling system may develop poor heat dissipation. An overheated engine accelerates the deterioration of engine oil. Once the oil deteriorates, the oil warning light will illuminate. Therefore, regular maintenance of the car's cooling system is essential during daily driving. 3. Incorrect Engine Oil Selection: Different grades of engine oil represent different viscosities. If the wrong oil is added, the engine oil light will also illuminate. Hence, it is important to pay attention to the correct oil grade when selecting engine oil.
107
Share

How to Replace the Wiper Blades on a Santana?

To replace the wiper blades on a Santana, follow these steps: 1. Press the clip onto the pin in the middle of the wiper blade; 2. Insert the U-shaped wiper arm into the clip and press it down firmly; 3. After ensuring it is fully in place, straighten the wiper blade and gently place it on the windshield. The functions of the wiper blades are: 1. To remove raindrops and dust from the vehicle's windshield; 2. To improve the driver's visibility; 3. To enhance driving safety. Taking the 2021 Santana as an example, it is a compact car with the following dimensions: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8 liters, and trunk capacity 466 liters. The 2021 Santana is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112 PS, maximum power of 82 kW, and maximum torque of 145 Nm, paired with a 5-speed manual transmission.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.