···
Log in / Register

What causes the noise from car window glass while driving?

3 Answers
Susanna
08/28/25 5:20am
Solutions for noise from car window glass while driving: 1. Loose door screws or lifting bracket, simply tighten the loose door glass. When driving on bumpy roads, the car window glass may make noise, which is usually caused by loose fastening screws inside the window glass or the lifting bracket. 2. Aging window glass sealing strip, replace it directly. Aging door glass sealing strips are often one of the reasons for window noise. If it's a new car making noise, simply purchase lubricant and apply it evenly on the sealing strip. 3. Debris in the window glass guide rail, the solution is to use tools to clean the debris in the guide rail. The gap in the sealing strip of the car slot can easily bring in dust and particles during the glass lifting process, which may cause vibration and noise from the window glass. If dust and particles accumulate more and more, it may damage the lifting motor.
Was this review help?
4
5
Share
MadelynLynn
09/10/25 3:45am
I've been driving a small car for several years, and the squeaky windows are really annoying, especially on highways or bumpy roads. The most common cause is the aging and deformation of the rubber seals around the window frame. Sun exposure and rain erosion make them hard and cracked, causing strange noises when the glass moves up and down. Additionally, dust or small stones stuck in the window glass tracks can also create rattling sounds. Last time I encountered this issue, the noise sounded like metal scraping, and it turned out to be loose screws in the window regulator. These problems should be addressed early; otherwise, they can worsen over time. Damaged seals may even lead to rainwater leakage and dust ingress. I recommend cleaning the tracks first, and if that doesn’t help, visit a repair shop. It usually doesn’t cost much but requires professional handling.
Was this review help?
2
2
Share
Expand All
DelHaven
10/24/25 4:33am
As an experienced driver, I think window noises depend on the sound. If it's a clicking noise, it's probably a stone or debris stuck in the track; if it's a buzzing sound, it might be friction between the glass and frame, often due to aging seals; and if it's a squeaking sound, it's usually rust or lack of lubrication in the window regulator. Don't overlook these small issues—wind noise at high speeds can be distracting, and if the regulator fails, the window could get stuck, which is dangerous. My advice is to regularly clean the tracks with a damp cloth and keep some lubricant spray handy for the rails. If the noise persists, have a mechanic check the motor or wiring. Older cars are more prone to these issues—safety first, after all.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

Why is it difficult to shift gears in an automatic transmission?

There are mainly three reasons for difficulty in shifting gears in an automatic transmission: 1. Operational factors: Incorrect operation by the driver, where the speed does not match the gear, leading to difficulty in shifting. This can be resolved as the driver gains experience and becomes more proficient. 2. Clutch factors: Rust on the transmission's primary shaft can prevent the clutch driven disc from moving properly, resulting in poor return and difficulty in engaging gears along the normal path. 3. Transmission factors: Old transmission fluid needs to be replaced. If not replaced in time, its lubrication effectiveness decreases, making gear shifting more strenuous.
19
4
Share

What causes the C4L to indicate an engine fault?

C4L indicating an engine fault may be caused by spark plug carbon deposits, dirty throttle body, leaking fuel injectors, cylinder wear, or oxygen sensor failure. Below is an introduction to the 2019 230THP automatic leading model Citroën C4L: Powertrain: Equipped with a 1.2-liter turbocharged 3-cylinder engine, paired with a 6-speed automatic manual transmission. Body dimensions: Length, width, and height are 4675mm, 1780mm, and 1500mm respectively, with a wheelbase of 2710mm. Chassis: The drivetrain is front-engine, front-wheel drive, with a MacPherson independent front suspension and a torsion beam non-independent rear suspension, featuring a unibody structure.
8
0
Share

How to Properly Use a Homemade Tire Pressure Gauge?

Correct usage measures for homemade tire pressure gauges: 1. Do not exceed the maximum pressure indicated on the dial. 2. Check tire pressure when the weather is hot or cold. 3. For tire valve stems without caps, remove any dirt before use. 4. Inflate to the tire pressure recommended by the tire manufacturer. 5. The accuracy of the tire pressure gauge will be affected if it is dropped or subjected to severe impact. 6. Pressure unit conversion: 1BAR=14.5PSI=1.02KG/CM2 (PSI stands for pounds per square inch). 7. Measure when the tires are cold. 8. Tighten the tire pressure gauge connector onto the tire valve stem until the gauge pointer reaches the highest position.
10
0
Share

What are the functions of the buttons in the Sylphy?

Here are the introductions to the functions of the buttons in the Sylphy: Electronic Stability System: It can effectively prevent the vehicle from skidding, fishtailing, or other loss of control situations. Parking Radar: The central control screen displays images, and the radar will sound an alarm when obstacles are detected. Auto Start-Stop: This function allows the engine to temporarily shut off. The vehicle will restart when the driver's foot leaves the brake pedal. Temperature Zone Synchronization: When this function is turned on, changing the temperature in the driver's zone will synchronize the changes in the other temperature zones. After turning off this function, each zone can be set individually to meet the needs of passengers in different positions.
7
5
Share

Does Land Rover have sedans?

Land Rover currently does not produce sedan models. The brand primarily focuses on luxury all-terrain SUV series, which are well-known for their SUV lineup and robust off-road capabilities. Below are the specifications of the 2022 Land Rover Defender 90 3.0T-P400XS: Body dimensions: Length x Width x Height are 4583mm, 2008mm, and 1969mm respectively, with a wheelbase of 2580mm. Chassis: The drivetrain features front-engine four-wheel drive, with a front suspension of double-wishbone independent suspension and a rear suspension of multi-link independent suspension, built on a unibody structure.
15
0
Share

Why does the Vios sell less than the Santana?

The reason why the Vios sells less than the Santana may lie in the Santana's advantages in appearance, power, and interior. Here are the relevant introductions: Appearance: The Santana is a compact car with a novel exterior design that meets the aesthetic requirements of young people for cars. Power: Taking the 2019 1.5L National V manual fashion version Santana as an example, it can deliver a maximum of 110Ps horsepower. The use of a 5-speed manual transmission ensures quick and smooth gear shifting without frustration, with consistent gear engagement and faster acceleration. Interior: The button layout is tilted towards the driver, making driving convenient and safe. Appropriate embellishments of small decorations add a sense of fashion to the interior space. Compared to the Toyota Vios's interior, the seat materials are softer, providing a more comfortable ride.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.