···
Log in / Register

What Causes the Exhaust Pipe to Buzz?

3 Answers
VanKinsley
09/03/25 3:33am
The reasons for the exhaust pipe buzzing sound: 1. Damage to the muffler or exhaust pipe; 2. The heat shield between the exhaust pipe and the ground may have aged; 3. Possible carburetor and platinum faults or delayed ignition timing. The structure of the car muffler is such that after the engine completes its power stroke, the exhaust stroke follows. Exhaust is the process of expelling waste gases from the cylinder. Since these gases are at high temperature and pressure, direct release through the exhaust pipe would create significant noise. The muffler is a multi-stage diversion and pressure reduction assembly. When installing the muffler, ensure the muffler gasket is properly seated and securely fastened to prevent gas leaks, which can affect noise reduction and cause yellowing at the muffler connection points.
Was this review help?
7
4
Share
GarrettFitz
09/15/25 5:13am
A few days ago, my exhaust pipe started making a buzzing noise. At first, I thought it was wind noise, but the sound got louder while driving, especially during acceleration. This is usually caused by a loose exhaust pipe joint or a damaged muffler inside. After some research, I found that vibrations can cause this type of noise. If the bolts are not tightened properly, the gap at the joint widens, and the airflow creates friction, resulting in the buzzing sound. Another possibility is that the exhaust pipe hanger has come off, causing it to hang unstably and resonate against the car's metal body. I need to get it checked as soon as possible. If there's a crack causing a leak, not only is the noise annoying, but exhaust fumes could also seep into the car, which is harmful to health. I can take a quick look under the car myself, but professional repair is safer. Don’t delay, as waiting could make repairs more expensive.
Was this review help?
15
2
Share
Expand All
ZaneLee
10/29/25 5:53am
When encountering a buzzing sound from the exhaust pipe, my first thought is that there might be an issue with the internal structure of the exhaust pipe, such as damaged sound insulation material or a perforated muffler. If you frequently drive on gravel roads, the impact could cause corrosion and perforation. Loose hangers are another common cause; if they're not positioned correctly, the vibration can become severe. I recommend first identifying the source of the noise. If it's a problem with the rear section of the exhaust pipe, simply replacing the component will suffice. If there's a hole in the middle section, welding is a more cost-effective solution. Regular cleaning of the exhaust pipe and checking the fastening bolts can help prevent such issues. If the buzzing becomes more noticeable at high speeds, try slowing down to see if there's any change. Don't ignore it, as exhaust system problems can have a chain reaction affecting engine efficiency.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

Are Bubbles in Car Window Tinting Film Harmful to Human Health?

Bubbled car window tinting film can release a certain amount of methanol, which may pose health hazards, especially for car owners with infants at home. If there are few and small bubbles on the rear window, you can try to handle them yourself by puncturing them with a needle and smoothing them out with a hard card or similar item. However, if there are numerous or large bubbles, it's advisable to seek professional assistance at a tinting shop, and re-tinting may be necessary. Below are additional details: 1. Causes of bubbling: Generally, the rear car window has defogger wires for deicing and defogging. When the defogger is activated, the wires heat up, causing the adhesive on the film to harden and lose its stickiness, resulting in bubbles. Frequent expansion and contraction due to temperature changes can also lead to deformation and bubbling. Additionally, bubbling on the rear window film may be related to the quality of the film itself or the installation process. 2. Post-installation precautions: (1) Avoid rolling down the windows for three days after the film is installed. (2) Do not wash the car for three days. (3) If the car has a sunroof, avoid opening it while driving, especially at high speeds, for three days. (4) If bubbles appear at the edges of the film, they should be repaired at the installation site within 24 hours. After this period, the adhesive around the bubbles will have dried, making the film immovable and likely to crease during repair. (5) For one month after installation, avoid attaching strong adhesive labels directly onto the film to prevent partial detachment from the glass.
15
1
Share

What kind of engine oil is best for turbocharged cars?

Turbocharged cars perform best with full synthetic engine oil. The method for changing to full synthetic engine oil is as follows: 1. Start the vehicle's engine for preheating; 2. Unscrew the oil drain plug; 3. Remove the oil filter; 4. Apply new engine oil to the interface gasket of the new oil filter; 5. Pour the new engine oil into the oil pan; 6. Check for leaks under the engine and test the engine with the oil dipstick. A turbocharged engine refers to an engine equipped with a turbocharger. Its maintenance methods include: 1. Avoid pressing the accelerator pedal hard immediately after starting the engine; 2. Do not turn off the engine immediately after prolonged high-speed operation; 3. Regularly clean the engine oil and filter.
8
0
Share

Differences in Tire Sizes?

You can check the size and dimensions of car tires from the data on the sidewall of the tire. Here are the relevant details: 1. Generally, for the same car model with different configurations produced by manufacturers, the lower-end versions may sometimes use one-size-smaller rims, but the aspect ratio of the tire will also increase, resulting in minimal overall difference. Larger rims will increase ground clearance and also improve comfort. 2. Car spare tires can be categorized into full-size spare tires and non-full-size spare tires. A full-size spare tire has the same specifications as the four original tires of the car and uses the same rim as the original wheels. A non-full-size spare tire is narrower in width or has a smaller rim size, usually made of steel rims, and comes with speed restrictions (maximum speed not exceeding 80km/h). It can only serve as a temporary replacement for the original tire.
15
4
Share

How to Adjust the Rearview Mirror of Audi A6L?

Here are the methods to adjust the rearview mirror of the Audi A6L: 1. The adjustment switch is located on the left door handle of the driver's seat, featuring a small round knob. Turn it to the left side, then move it up, down, left, or right to adjust the view of the left rearview mirror. 2. Turn the knob to the right side and move it up, down, left, or right to adjust the view of the right rearview mirror. Below are some related details: 1. The Audi A6L is a model under the Audi brand, with dimensions of 5038mm in length, 1886mm in width, and 1475mm in height, and a wheelbase of 3024mm. 2. The vehicle comes standard with the Audi Virtual Cockpit, equipped with a 10.1-inch display screen, an 8.6-inch touchscreen below, and a 12.3-inch full LCD instrument panel.
13
1
Share

Why is the key light flashing red on the Sylphy dashboard?

The key light flashes red because the smart key is not detected, and the smart key is not detected due to insufficient battery power in the key. In this case, car owners need to replace the battery. Here are some related details: 1. The Sylphy is a compact sedan under the Nissan brand. 2. The Sylphy is equipped with a 1.6-liter naturally aspirated engine, codenamed HR16. This engine has a maximum power of 102 kW, a maximum torque of 169 Nm, a maximum power speed of 6300 rpm, and a maximum torque speed of 4000 rpm. 3. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. The CVT transmission is compact, lightweight, simple in structure, and low in production cost. Many Japanese cars frequently use CVT transmissions. The CVT transmission allows the engine to maintain a reasonable speed range, so cars equipped with CVT transmissions are generally more fuel-efficient.
2
3
Share

What is the normal water temperature for the Haval H9?

The normal water temperature range is between 90 to 100 degrees on the temperature gauge. Below are related details: 1. In case of overheating due to coolant loss, you can add a small amount of distilled water as an emergency measure. For overheating caused by prolonged driving, pull over safely, turn on the hazard warning lights, and allow the vehicle to cool down naturally. 2. The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel light, washer fluid light, electronic throttle light, front and rear fog light indicators, and warning lights. Dashboards vary by car model, but conventional gauges typically include the speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge. 3. The water temperature gauge sensor is a thermistor-type sensor, threaded into the engine's cooling water passage. The thermistor determines the current flow through the gauge's coil windings, which drives the needle movement. In the past, tap water was used as engine coolant, but modern vehicles often use specialized coolant, hence it's also referred to as the coolant temperature gauge.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.