···
Log in / Register

What brand is the engine of the Geely Boyue?

3 Answers
RileyLynn
08/28/25 6:41am
The engine of the Geely Boyue is produced by Geely Auto itself, utilizing technology from Volvo, making it a domestically produced engine. The engine model of the Geely Boyue is JLE-4G18TDC, a 1.8T version with a maximum power of 135kw/5500rpm and a maximum torque of 285Nm/1500-4000rpm. The 2.0L version has a maximum power of 104kw/6000rpm and a maximum torque of 178Nm/4000-4500rpm. For daily maintenance of the Geely Boyue's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions. For diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various engine problems. To avoid faults, change the oil regularly based on usage conditions and keep the oil level moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter is blocked and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. Small amounts remain suspended in the oil, while large amounts separate and block filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
Was this review help?
17
4
Share
DiPeyton
09/10/25 4:57am
I've been driving a Geely Boyue for almost three years now, equipped with Geely's own engine, specifically the JL series 1.8T turbocharged model. The power is quite ample, with smooth acceleration and quick response when overtaking. Fuel consumption is reasonable, around 10 liters per 100 km in the city and 6-7 liters on the highway. I use 95-octane gasoline for daily commuting, and regular maintenance only costs a few hundred yuan, such as changing the engine oil and air filter. Once, I took a long-distance trip, and the engine didn't have any issues, although I did notice some slight jerking when using poor-quality fuel. I recommend the Boyue for its reliable engine, but advise avoiding low-quality fuel. Maintenance is simple and cost-effective.
Was this review help?
14
0
Share
Expand All
MacKiara
10/24/25 5:48am
As a frequent car repairer, I've noticed that the Geely Boyue's engines are primarily Geely's own brand, with models like the 1.5T or 1.8T JL series being the most common. After inspecting many vehicles, common fault points are often due to spark plug aging or fuel line blockages, leading to starting difficulties. It's recommended to replace the spark plugs every 20,000 kilometers and maintain the fuel filter regularly. The newer engines have higher fuel efficiency, and using a multimeter to check voltage during maintenance can help avoid major issues. Overall reliability is decent, but don't overlook small details to avoid unnecessary expenses.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

What Are the Reasons for the Car Air Conditioner Fan Not Turning On When Activated?

There are several reasons why the car air conditioner fan does not turn on when activated, including poor contact of the main control switch, damage to the fan motor coil, and detachment of the fan bearing. Poor contact of the main control switch: If the air conditioner switch has poor contact, it cannot control the normal activation of the car air conditioner, and the lack of connection between the two leads to the fan not turning on. Solution: Replace the air conditioner control switch and check for any short circuits in the connecting wires. Damage to the fan motor coil: If the fan motor coil is damaged, the fan cannot receive power normally, resulting in it not turning on. Solution: Use a multimeter to measure the contact resistance of the main control switch. If the resistance is too high or zero, repair or replace the component. Detachment of the fan bearing: When the fan bearing is detached, activating the air conditioner causes the bearing to spin idly without the fan turning normally. Solution: Reinstall and secure the fan bearing. How the car air conditioner works: The car air conditioning refrigeration system consists of a compressor, condenser, liquid storage dryer, expansion valve, evaporator, and blower, among other components. These parts are connected by copper pipes and high-pressure rubber hoses to form a sealed system. When the refrigeration system operates, the refrigerant circulates in different states within this sealed system.
13
5
Share

Are There Any Disadvantages to Frequent Car Maintenance?

Frequent car maintenance does not have disadvantages, provided it is performed at reputable automotive repair facilities. Otherwise, human factors may negatively impact the vehicle's lifespan. Below is relevant information about car maintenance: 1. Definition: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of a vehicle, also known as automotive servicing. 2. Scope: Modern car maintenance primarily includes servicing for the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more.
1
1
Share

What is the difference between OEM headlights and aftermarket headlights?

OEM headlights and aftermarket headlights differ in quality. The housing of OEM headlights maintains its sealing performance for many years without significant aging, while the housing of aftermarket headlights tends to lose sealing performance and show noticeable aging over time. Headlights are a crucial component of a car, serving the primary function of illumination. Also known as car front lights or LED daytime running lights, headlights act as the 'eyes' of the vehicle, impacting not only the owner's external image but also safe driving during nighttime or adverse weather conditions. The use and maintenance of car lights are essential and should not be overlooked.
15
1
Share

What is the principle of hybrid power?

Hybrid power works by using both an internal combustion engine and an electric motor to provide energy for the vehicle, thereby driving the car. This results in improvements in fuel economy, comfort, and acceleration. In hybrid vehicles, the electric motor serves as an auxiliary power source to assist the engine, delivering strong and smooth power during normal driving. Hybrid vehicles offer superior fuel efficiency and excellent driving performance. While the engine still consumes fuel, the assistance from the electric motor during startup and acceleration helps reduce fuel consumption, leading to lower fuel costs compared to similarly sized conventional vehicles.
15
4
Share

How Long After Touch-Up Painting Can You Wax?

You can wax your car 24 hours after touch-up painting. Here are the relevant details: 1. Car waxing: This is a traditional car care procedure. The primary functions of waxing are waterproofing and protection against acid rain. The wax coating reduces water droplet adhesion on the car body. It also provides protection against high temperatures and UV rays, as the wax film reflects some light, effectively preventing paint aging. 2. Additional information: When a car moves, friction with air generates static electricity. Car wax effectively insulates the body from friction with air and dust. Reduced static means less dust accumulation, and wax also enhances shine, making the car appear newer and more attractive.
1
1
Share

What is the function of the powder inside the three-way catalytic converter?

The powder inside the three-way catalytic converter serves to decompose harmful gases and also contributes to environmental protection. Below is relevant information about automotive three-way catalytic converters: 1. Function: The three-way catalytic converter is installed in the front section of the vehicle's exhaust pipe to reduce toxic and harmful substances in automobile exhaust. 2. Quality assessment: When the catalytic converter operates normally, it generates substantial reaction heat due to oxidation reactions. Therefore, performance can be evaluated by comparing temperature differences. Start the engine, warm it up to normal operating temperature, maintain engine speed at approximately 2500r/min, and lift the vehicle.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.