···
Log in / Register

What brand is fronway tires?

3 Answers
Guzman
09/03/25 7:08am
fronway tires are produced by Qingdao Hades Tire Co., Ltd., a company specializing in passenger car tires, truck tires, radial heavy-duty tires, bias heavy-duty tires, radial light truck tires, radial bias tires, agricultural tires, and industrial tires. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, tires must possess high load-bearing capacity, traction performance, and cushioning performance. Additionally, they are required to have high wear resistance, flex resistance, and low rolling resistance with minimal heat generation.
Was this review help?
7
5
Share
IkerAnn
09/15/25 8:28am
I was curious about Fronway tires before. They're generally categorized as a Chinese-made budget brand focusing on cost-performance, similar to Fullway or comparable names, likely emphasizing durability and affordability. I searched online and found they're suitable for daily city driving—not very famous but offer stable performance. When choosing tires, check tread depth and pressure; anti-slip treatment is crucial, especially in rain or snow. I recommend verifying if specifications match your vehicle first—don’t just look at price, safety comes first. I tried cheap tires once and found them noisy; switching brands made a big difference. Regular maintenance can extend their lifespan.
Was this review help?
9
2
Share
Expand All
TaylorLee
10/30/25 2:17am
To be honest, I haven't used Fronway tires extensively, but they seem to be positioned in the mid-to-low-end market, emphasizing durability and fuel efficiency. Judging by the tire types, they are mostly suitable for sedans or compact SUVs, with tread patterns designed to reduce rolling resistance and improve fuel economy. On a related note, don't neglect tire pressure checks, as both overinflation and underinflation affect handling and wear rate. I make it a habit to check once a month for peace of mind and cost savings. If you're on a tight budget, you might consider similar brands like Linglong, but be sure to purchase from authorized channels to avoid counterfeit pitfalls.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

How to Switch from Low Beam to High Beam?

The method to switch from low beam to high beam is: 1. Rotate the light control lever switch located on the left side of the steering wheel forward to the end to turn on the low beam; 2. Push the lever upward to turn on the high beam, then push it downward to turn off the high beam, completing the light alternation. The method for using car high and low beams is: 1. Turn on the low beam when driving on roads with streetlights at night; 2. Turn on the low beam when encountering pedestrians, narrow roads, narrow bridges, and curves at night; 3. Turn on the high beam at night when there are no streetlights on the roadside or when the road is straight and distant with poor visibility; 4. When encountering an oncoming vehicle at night, if the high beam is on, be sure to turn it off and turn it back on after the oncoming vehicle has passed.
5
0
Share

What is the method to update the navigation system in the Volkswagen Lavida?

To update the navigation system in the Volkswagen Lavida, follow these steps: 1. Enter the navigation interface and click on the menu; 2. Go to function settings, click on 'About Navigation,' and select 'Update.' Taking the 2019 Volkswagen Lavida as an example, it belongs to the compact car category with body dimensions of 4613mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm and a curb weight of 1210kg. The 2019 Volkswagen Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
20
1
Share

What are the methods to remove carbon deposits from an engine?

Methods to remove carbon deposits from an engine include: 1. Disassembling and cleaning various engine components; 2. Performing an intravenous cleaning (commonly known as "drip cleaning") for the car; 3. Adding fuel system cleaner to the fuel tank. The causes of carbon deposits in cars are: 1. Long-term poor driving habits of the owner; 2. Mismatch between fuel grade and compression ratio; 3. Aging or damage to the engine carburetor; 4. Prolonged high-load driving; 5. Failure to replace the air filter; 6. Inaccurate ignition timing or fuel supply timing; 7. Low engine temperature; 8. Poor sealing of valves and valve seats; 9. Extended engine idling. Methods to prevent carbon deposits in cars include: 1. Regularly cleaning components prone to carbon buildup; 2. Avoiding prolonged idling; 3. Using appropriate gasoline additives; 4. Using the gasoline specified for the vehicle.
10
4
Share

What brand is the engine of the Dacheng G60s car?

The engine of the Dacheng G60s is produced in Jiangxi, so this engine is a domestic engine. The engine model of the Dacheng G60s is JT15T, with a maximum power of 120 kW, a maximum torque of 230 Nm, a maximum horsepower of 163 Ps, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1750-4500 rpm. For daily maintenance of the Dacheng G60s engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, it may burst the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
4
3
Share

What are the dimensions of the Mercedes-Benz GLE?

The length, width, and height of the Mercedes-Benz GLE are 4941mm, 2018mm, and 1782mm respectively, with a wheelbase of 2995mm. Below is a related introduction to the Mercedes-Benz GLE: 1. In terms of power, the Mercedes-Benz GLE uses two engines, one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter turbocharged engine. The 2.0-liter turbocharged engine has a maximum power of 190kw, a maximum torque of 370 Nm, a maximum power speed of 6100 rpm, and a maximum torque speed range of 1800 to 4000 rpm. The 3.0-liter turbocharged engine has a maximum power of 270kw, a maximum torque of 500 Nm, a maximum power speed range of 5500 to 6100 rpm, and a maximum torque speed range of 1600 to 4500 rpm. 2. In terms of suspension, the Mercedes-Benz GLE uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
13
5
Share

What is the reason for the right side being too wide when parallel parking?

The reason for the right side being too wide during parallel parking is that after seeing the corner of the parking space in the left rearview mirror and straightening the steering wheel to reverse, the left rear wheel still has a considerable distance from the parking line when turning left. Below are some tips for parallel parking in the driving test (Subject 2): 1. Starting: After getting into the car, adjust the seat first, then fasten the seatbelt—this should be done every time during the test. Adjust both side mirrors so that about one-quarter of the inner part of the mirrors shows the car body. 2. Positioning: Start with the clutch halfway engaged; if confident, you can slightly accelerate. Follow the principle of 'press clutch, shift gear, turn signal, honk, and check surroundings' when starting. Park the car parallel to the parking space, 30-50 cm away, with the rear end passing the frontmost pole. 3. Reversing: Shift into reverse gear, start with the clutch halfway engaged, and control the speed. Turn right to look at the lower rear corner of the right door glass. When the first pole appears, quickly turn the steering wheel to the right until it stops while moving slowly. Then, look at the left rearview mirror. When the second pole (diagonal to the first pole) appears, stabilize the speed and quickly turn the wheel two turns to the left. While turning back, start looking at the right rearview mirror for positioning. When the base of the rearview mirror passes the first pole, quickly turn the steering wheel all the way to the left. (Note: Once you find a turning point and start turning, immediately look for the next one.) Watch the front of the car and stop when the car body is straight. If the front wheels need to be straightened, do so quickly as the car body is about to straighten. 4. Exiting: Shift into first gear, turn on the left signal, honk, and start slowly with the clutch halfway engaged. Quickly turn the wheel to the left when starting. When the right front corner of the car passes the pole, quickly turn the wheel two turns to the right. After the third turn, adjust the steering based on the distance to the right pole and the speed of turning. Look ahead and straighten the front wheels as the car is about to align, allowing the car to move straight.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.