What are the differences between Haval H2 and H6?

Does the Sylphy come with built-in navigation?

The Sylphy comes with built-in navigation and is a compact car. Taking the 2021 Sylphy as an example, its body dimensions are: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50l, and curb weight 1188kg. The 2021 Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122ps, maximum torque of 155nm, and maximum power of 90kw, paired with a 5-speed manual transmission.

17

2

Share

How to Turn on the Air Conditioning Cooling in a Honda?

To turn on the air conditioning cooling in a Honda, press the AC button on the center console and adjust the fan speed by rotating the fan speed knob. Taking the 2021 Honda Civic as an example, it is a compact car with the following dimensions: length 4517mm, width 1799mm, height 1434mm, wheelbase 2700mm, front track 1547mm, and rear track 1563mm. The 2021 Honda Civic features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 177PS, maximum power of 130kW, and maximum torque of 220Nm, paired with a CVT transmission.

14

3

Share

How to Drive in Snowy Weather?

Methods for driving in snowy weather are: 1. After ignition, gently press the accelerator to avoid wheel spin; 2. Maintain a safe distance from the vehicle in front; 3. When starting the vehicle on snow or driving up an icy slope, use a low gear, and switch gears according to road conditions after the vehicle stabilizes. Precautions for driving in snowy weather include: 1. Warming up and cleaning the car: To allow the engine oil to lubricate better for the engine to reach an optimal state, and to increase the water temperature to ensure better use of the heating system inside the car; 2. Slow down: Driving slowly in snowy weather is essential to avoid accidents; 3. Avoid sudden braking: Sudden braking is highly discouraged when driving in snow as it can easily lead to skidding or rear-end collisions.

19

2

Share

What to Do When the Wheel Hub is Scratched?

If the wheel hub is scratched and the situation is severe, it should be taken to a repair shop for restoration, which involves grinding and repainting the hub. The wheel hub is the rotating part of the wheel core connected by columns within the tire's inner contour, supporting the metal component at the center of the tire mounted on the axle. The maintenance methods for the wheel hub are: 1. When the vehicle is in a humid area, the hub should be cleaned frequently to prevent salt from corroding the aluminum surface; 2. If necessary, after cleaning thoroughly, wax can be applied to the hub for maintenance to keep it shiny; 3. When the hub temperature is high, it should be allowed to cool naturally before cleaning. Do not use cold water to clean it, as this can damage the aluminum hub, cause the brake disc to deform, and affect braking performance. Using cleaning agents on the hub can cause chemical reactions on its surface, leading to loss of shine.

15

4

Share

How to Reset the Maintenance Light on a Peugeot 408?

The method to reset the maintenance light on a Peugeot 408 is as follows: 1. Turn on the car's power and reset the trip meter on the dashboard; 2. Press the right button to switch to the instant fuel consumption display, then turn off the power; 3. Hold the right button, turn on the power for self-check, continue holding the right button for three seconds, then release the right button; 4. Immediately press both the left and right buttons simultaneously and release them within two seconds to reset. Taking the 2020 Peugeot 408 as an example, its body dimensions are: length 4750mm, width 1820mm, height 1488mm, wheelbase 2730mm, fuel tank capacity 53 liters, and trunk capacity 455 liters.

19

0

Share

How to Determine if the Steering Knuckle is Deformed?

Methods to determine if the steering knuckle is deformed include: 1. Bearings are prone to damage; 2. Poor steering wheel return; 3. Unusual noises from the vehicle body. The steering knuckle arm, commonly known as the 'sheep horn,' is one of the key components in a vehicle's steering system. It ensures stable driving and sensitive transmission of steering direction. Its function is to bear the front load of the vehicle, support and drive the front wheels to rotate around the kingpin, enabling the vehicle to turn. The steering knuckle serves as the hinge for wheel steering, shaped like a fork, with two coaxial holes on the upper and lower forks for installing the kingpin. The steering knuckle spindle is used to mount the wheel, and the two ears with pin holes on the steering knuckle are connected to the fist-shaped parts at both ends of the front axle via the kingpin, allowing the front wheels to pivot around the kingpin at a certain angle for vehicle steering.

16

4

Share

What are the differences between Haval H2 and H6?

Does the Sylphy come with built-in navigation?

How to Turn on the Air Conditioning Cooling in a Honda?

How to Drive in Snowy Weather?

What to Do When the Wheel Hub is Scratched?

How to Reset the Maintenance Light on a Peugeot 408?

How to Determine if the Steering Knuckle is Deformed?

Does driving in eco mode save fuel?

What colors are available for the Sylphy?

Which material is best for engine guards?

What are the engine specifications of the Arrizo GX?