···
Log in / Register

Is There Anyone in the Passenger Seat During Subject 2 Test?

1Answers
VanAndrew
09/08/2025, 10:08:40 PM

There is no one in the passenger seat during the Subject 2 test. Below are specific details about Subject 2: Test Requirements: The requirement for parallel parking is that the driver must park the vehicle in the right-side parking space without the wheels touching the lane boundary or parking space boundary. Test Content and Requirements for Subject 2: The five test items are reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. Subject 2 requires 26 class hours, with 2 hours dedicated to theoretical knowledge, so the actual practical training is 24 hours.

Was this review help?
113
Share
More Q&A

What grade of gasoline is suitable for the CX-5?

CX-5 should use 92-octane gasoline, as this is the recommended fuel grade specified in the vehicle's official owner's manual. In addition to checking the owner's manual for the appropriate gasoline grade, you can also find this information on the fuel filler cap, which will be clearly marked. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is even higher, 98-octane gasoline is recommended. However, with the use of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high-compression engines can also be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the CX-5 is occasionally filled with the wrong gasoline grade, simply switch back to the correct grade after the tank is empty. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-octane fuel, using higher-octane gasoline will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane fuel, using lower-octane gasoline can cause engine knocking. The significantly lower octane rating lowers the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but noticeable knocking indicates severe engine conditions. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, potentially leading to cylinder scoring in severe cases.
113
Share

What is the fuel consumption per 100 kilometers for the Tiguan L330?

Tiguan L330 is equipped with a 186 horsepower engine, with an official fuel consumption of 6.6L per 100 kilometers. The fuel tank capacity of the Tiguan L330 is 60L, and the distance it can travel on a full tank is 60/6.6*100=909km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacement engines generally consume more fuel than those with smaller displacement engines because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Cars with greater weight will have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during a cold start, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
103
Share

Can Different Types of Brake Fluid Be Mixed?

Brake fluid should not be mixed. Different types and brands of brake fluid contain varying compositions, and mixing them can lead to a decline in performance and chemical reactions, which may reduce the braking effectiveness of the vehicle and negatively impact the fluid's temperature resistance, compromising driving safety. Brake fluid is a functional liquid used to stop wheel rotation, serving to transmit energy while also providing anti-corrosion, anti-rust, and lubrication benefits. Types of brake fluid: Castor oil-alcohol type, made from refined castor oil and low-carbon alcohol; Synthetic type, formulated with ethers, alcohols, esters, and additives for lubrication, oxidation resistance, rust prevention, and rubber swelling resistance; Mineral oil type, produced from refined light diesel fractions with thickeners added. Precautions for using automotive brake fluid: If gasoline, diesel, or engine oil accidentally mixes into a synthetic brake fluid-based braking system, the incompatibility between fluids can reduce braking effectiveness. For vehicles driven normally for 40,000 kilometers or with brake fluid used continuously for over two years, the fluid may degrade due to prolonged use, so timely replacement is essential. Vehicles equipped with a brake fluid level warning device should monitor whether the warning light is flashing and if the sensor is functioning properly. When the brake fluid is low, it should be replenished promptly. Stored brake fluid should be maintained between the marked minimum and maximum capacity levels. If the brakes exhibit inconsistent performance during normal driving, the brake fluid should be replaced immediately. Before replacement, clean the braking system thoroughly with alcohol. If the vehicle pulls to one side during braking, conduct a comprehensive inspection of the braking system. If the wheel cylinder rubber cups are excessively swollen, it may indicate poor-quality brake fluid. In such cases, replace the fluid with a higher-quality option and also replace the rubber cups. During seasonal changes, especially in winter, if braking performance declines, the brake fluid grade may not be suitable for winter conditions. When replacing, choose a brake fluid with lower viscosity at low temperatures. Do not mix different types or brands of brake fluid. For braking systems with specific requirements, use the designated brake fluid brand. Since formulations vary across brands and types, mixing can degrade performance. Even brands labeled as compatible or interchangeable may not perform satisfactorily, so avoid long-term mixed use. If water or impurities are found in the brake fluid, replace or filter it immediately to prevent insufficient braking pressure and compromised braking performance. Regularly replace brake fluid: The volume of brake fluid changes with temperature, so the reservoir has a vent hole. Air drawn in through this hole may contain moisture or contaminants, which can lower the boiling point of the fluid. During prolonged braking, the system heats up, increasing the risk of vapor lock due to compressed air, leading to reduced braking force or failure. For safety, brake fluid must be replaced periodically.
111
Share

What are the symptoms of aging ignition coils?

Ignition coil aging manifests as follows: Engine vibration: During operation, the engine may exhibit intermittent shaking, accompanied by symptoms such as sluggish acceleration. Increased fuel consumption and reduced power: As the spark plug's firing capability weakens, the combustion of the air-fuel mixture in the engine becomes incomplete, leading to adverse effects like increased fuel consumption and decreased power. Excessive carbon buildup: Weakened spark plug firing capability results in incomplete combustion of the air-fuel mixture. This incomplete combustion produces a carbonaceous deposit called carbon buildup, and black smoke may also emerge from the vehicle's exhaust pipe.
113
Share

What Does Contract Car Mean?

Contract car refers to signing an agreement with the merchant to receive subsidies on a monthly or quarterly basis within a specified period. Below is more relevant information: 1. You must prepay a fee to qualify for the subsidy policy under the corresponding contract. 2. Currently, there are many similar contracts in the market, mainly reflected in different industries. 3. During the lease period, you must comply with national laws, regulations, and decrees, drive safely, and bear all legal liabilities and financial losses caused to Party A due to illegal, disciplinary, or traffic violations. 4. The leased vehicle cannot be used for business activities, subleased, lent, pawned, or mortgaged; it cannot be handed over to unlicensed drivers.
104
Share

Do I still need to display the vehicle annual inspection sticker?

Currently, the vehicle annual inspection sticker does not need to be displayed on the windshield, as the electronic version can be used directly. Electronic inspection exemption label: For vehicles exempt from inspection within 6 years, you can directly apply for the electronic inspection certificate online. For vehicles still within the valid inspection period, the traffic management department will uniformly generate electronic inspection certificates, which vehicle owners can download and use online. Vehicle annual inspection: Vehicle annual inspection is a mandatory test for all vehicles with official license plates and registration certificates, mainly aimed at eliminating potential safety hazards and ensuring proper vehicle maintenance.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.