···
Log in / Register

Is the first free maintenance available nationwide?

3 Answers
LeAaron
08/30/25 7:45am
First free maintenance is available nationwide. The relevant introduction about first maintenance is as follows: First maintenance content: Replace engine oil and oil filter; Check the operation of the braking system, such as the gap and wear of brake pads and discs; Tighten the bolts of each system; Check and adjust the transmission belt; Check and adjust tire balance and alignment; Check and replenish various fluids; Check the operation of components such as lights, battery, shock absorbers, etc. Purpose of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life.
Was this review help?
13
1
Share
CalvinRose
09/12/25 4:41am
I remember when I first bought my car, I was also concerned about the free first service. Generally speaking, the free first service policies of car brands are mostly nationwide promotions. For major brands like Toyota and Volkswagen, as long as you go to an authorized 4S dealership, you can get your first service for free at any nationwide chain store. However, this doesn’t mean it’s absolutely uniform, as some small dealers or regional promotional activities might have restrictions, such as limited resources in remote areas or additional requirements. My advice is to first check the owner’s manual, look up the brand’s official website for the service hotline to confirm, or directly ask your local 4S dealership to clarify—don’t get caught by extra charges. The first service includes basic items like oil and filter changes, and getting it done for free can save you a few hundred yuan. It’s crucial for breaking in a new car, and missing it could affect the engine’s lifespan. In short, just keep an eye out, and you’ll be fine.
Was this review help?
3
0
Share
Expand All
LukasMarie
10/26/25 5:29am
As someone who has long followed automotive services, I've found that free first maintenance really depends on the brand's promise. Most manufacturers offer nationwide coverage - if the dealer promised free service at purchase, authorized shops will honor it. However, some niche brands may only provide this in specific cities. I've seen cases where friends got free first maintenance while traveling, proving standard procedures are unified. The key is booking in advance and not missing the service window, typically valid within 3 months or 5,000 km. First maintenance isn't just about saving money; it includes crucial safety checks for brakes, lights, etc., preventing minor issues from escalating. If you don't have time to check the manual, calling customer service is the easiest solution. Always verify details beforehand to avoid disputes later.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

What is the difference between registering a vehicle under a company or an individual?

The differences between registering a vehicle under a company or an individual are as follows: 1. Cost differences: Generally, if your car is registered under a company, the advantage is that you can enjoy the responsibilities borne by the company for the vehicle. Some companies may even cover insurance costs, and for business trips, fuel expenses, maintenance fees, and other vehicle-related costs can be reimbursed. If registered under an individual, you have to pay for these expenses yourself. 2. Ownership differences: If registered under an individual, the car is your private property. If registered under a company, the car is not your private property, and the company has the right to control it, with priority given to company usage in some cases.
13
5
Share

What does the exclamation mark on the Magotan cruise control display mean?

There are five possible scenarios when an exclamation mark appears on the car dashboard: general faults, automatic transmission faults, brake system faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these five situations: General Faults: An exclamation mark inside a triangle indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Abnormal Tire Pressure: An exclamation mark with a horizontal line below parentheses is the tire pressure monitoring warning light. It illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
15
0
Share

What is the reason for the maintenance mileage not being displayed on the Mitsubishi Eclipse Cross?

The main reason for the maintenance mileage not being displayed on the Mitsubishi Eclipse Cross is a sensor malfunction. Below is an analysis of the related causes: 1. Sensor malfunction: Fault in the wheel speed sensor/vehicle speed sensor (Currently, models equipped with ABS/ESP use the wheel speed sensor signal as the reference signal for the speedometer and odometer. Models without ABS/ESP have a vehicle speed sensor on the output shaft of the transmission). This fault can be diagnosed by using a decoder to read the data stream, lifting the vehicle, and rotating the wheels to check for wheel signals. 2. Other reasons: Signal transmission issues, wiring or short circuits (can be checked by measuring the wiring with a multimeter); malfunction of the instrument panel or control unit.
3
3
Share

What are the impacts of converting a manual transmission to an automatic transmission?

If the conversion from manual transmission to automatic transmission is done properly, it will not affect the car, but it may impact vehicle inspection. There are three steps to convert a manual transmission to an automatic transmission: Modifying the clutch: This achieves the functionality of an automatic transmission, though not fully automatic—it's more like semi-automatic. You won't need to press the clutch, but you still have to shift gears manually. The main benefit is that you don’t need to press the clutch when shifting, and the engine won’t stall when braking, freeing up your left foot. Installing an automatic transmission: This actually involves retrofitting an automatic clutch system, which modifies certain components to allow the clutch to engage and disengage automatically. A series of sensors are connected to the gear lever, ECU, and other parts. When the car starts, the ECU sends a starting signal, and the driver shifts into first gear. The sensors receive these two signals and send them back to the processor for data processing. Automatic clutch system: This allows the car to come to a complete stop while in gear. The system will automatically press the clutch to prevent the engine from stalling. When starting again, simply shift into first or second gear, release the brake, and the car will move forward on its own, just like an automatic transmission.
17
4
Share

Where is the OBD port located?

dsobd computer interface is located at the very bottom of the center console. Here is the relevant introduction: 1. Definition: The computer diagnostic port is the OBD diagnostic interface, whose full name is OnBoard Diagnostics. The OBD system continuously monitors the engine's operating conditions to check whether the vehicle's exhaust exceeds standards. If it does, it will issue a warning immediately, and the OBD system should be repaired promptly if a fault occurs. 2. Regulation: Annual vehicle inspections have limited effectiveness in controlling vehicle emissions, but with OBD installed, it can monitor emission levels at all times. To standardize the diagnosis of vehicle emissions and drivability-related faults, starting from 1996, all new cars sold in the United States must have similar diagnostic instruments, fault codes, and repair procedures, i.e., comply with the OBD II program regulations.
6
5
Share

What do the small circles on tires mean?

Red dots indicate the position of maximum longitudinal rigidity on the tire. The yellow hollow dot is called the tire light point mark, indicating that this position is the lightest part of the tire circumference. When replacing the tire, this part must be aligned with the heaviest position of the valve on the rim for installation to ensure optimal wheel balance during driving. The main functions of tires include: 1. Supporting the vehicle: Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions. 2. Enhancing vehicle performance: Transmitting traction and braking torque to ensure good adhesion between the wheel and the road surface, thereby improving the vehicle's power, braking, and passability; working with the vehicle suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Ensuring vehicle safety: Preventing severe vibrations and early damage to vehicle components, adapting to high-speed performance while reducing driving noise, and ensuring driving safety, handling stability, comfort, and energy efficiency.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.