···
Log in / Register

Is it necessary to print the Subject 1 exam voucher?

6Answers
ParkerDella
09/08/2025, 11:37:16 PM

Whether the Subject 1 exam voucher needs to be printed depends on the regulations of different regions regarding the admission voucher for Subject 1. For specific inquiries, you can consult the driving school or instructor. In most regions across the country, there is no need to print the voucher after successfully scheduling the Subject 1 exam. You can enter the examination venue with just your ID card and facial recognition during the exam. Subject 1 exam content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; basics of safe driving and civilized driving; fundamental knowledge related to motor vehicle driving operations. Passing score for Subject 1: The total time for the Subject 1 exam is 45 minutes. The exam paper consists of 100 questions, including true/false questions and single-choice questions, with a full score of 100 points. A score of 90 or above is required to pass. The exam paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." Documents required for the Subject 1 exam: For the Subject 1 exam, you only need to bring your ID card. Please note that an expired ID card cannot be used.

Was this review help?
108
Share
MacHannah
09/20/2025, 04:25:28 AM

I remember when I took the written test for my driver's license, my admission voucher had to be printed because the test center required a physical copy as proof of entry—phone screenshots weren’t acceptable. That time, I tried using an electronic version, but the staff made me go to a nearby print shop to get a hard copy, and I almost ended up late. Looking back now, regulations vary by location. Some cities might accept digital vouchers, like during the pandemic when paperless procedures were promoted, but most driving schools and test centers still lean conservative. To be safe, I’d recommend printing it out and bringing it with you. On exam day, the crowds make on-site printing inconvenient and expensive, so preparing in advance saves a lot of hassle. Print shops usually charge just one yuan per page—way better than missing your test. If you forget, you can ask the front desk for a last-minute solution, but don’t take the risk. Remember to double-check all your materials before the exam, including your ID and photos, to keep the process smooth.

Was this review help?
8
Share
Expand All
CodyFitz
11/03/2025, 09:01:04 PM

Getting a driver's license involves a crucial step that many overlook: printing the subject one exam voucher. From my experience, most test centers strictly require a printed copy to prevent cheating or data issues. Officially, the printed version displays clear personal information and a barcode for faster machine scanning. Electronic versions might fail to load in areas with poor signal, causing delays. A friend once shared how his phone screenshot got rejected, costing him over 100 yuan for a retake and an extra week's wait. My personal routine is printing three copies beforehand and keeping them handy in my bag. While platforms like the Traffic Management 12123 App now support digital verification, always check with your driving school first—don't rely on luck. Also, note these vouchers have short validity; don't delay your exam after printing.

Was this review help?
5
Share
Expand All
Elias
12/17/2025, 09:01:10 PM

Regarding the printing of the subject one exam voucher, I've checked some information, and in most cases, it needs to be printed. It's like a boarding pass, where the exam information and QR code must be displayed on paper. The exam venue may not have printing facilities, and trying to print on-site could delay the exam. Relying on an electronic version is not reliable—if the network fails or the device runs out of power, it could cause major trouble. I believe the safest approach is to print it when registering online. Exam centers usually provide clear instructions, and the process is straightforward. If you don't have a printer, go to an internet café or a shared printing point—spending a little money for peace of mind is worth it. If you forget, you can try asking the exam supervisor for leniency, but it usually doesn't work, and reapplying for the exam might be cumbersome. I recommend candidates prepare all materials a day in advance to avoid last-minute stress and mistakes.

Was this review help?
13
Share
Expand All
Kirk
02/06/2026, 09:45:17 PM

From the details, whether the subject one voucher needs to be printed, my experience is absolutely yes. The entrance inspection at the test center is strict, and a paper voucher is quick to scan and convenient for registration. The electronic version may not be recognized due to screen issues or glare, leading to disputes. I have taken the test several times, and each time, a printed and signed voucher was required. If you don't bring one, the staff will ask you to go out and print it, which takes time and may cause you to miss the roll call. The risk is that subject one appointments are limited in number, and being late multiple times can affect subsequent test opportunities. Before printing, confirm the date and location to avoid a wasted trip. It is recommended to use a high-quality printer to ensure clear information. Also, pay attention to the weather, such as bringing a protective cover on rainy days to prevent voucher damage. Anyway, better safe than sorry, print an extra copy and keep it in the car as a backup.

Was this review help?
15
Share
Expand All
StHope
05/02/2026, 01:17:47 PM

When it comes to printing the subject one exam voucher, I believe printing is a basic requirement—don’t be lazy. In the current digital trend, some places are experimenting with electronic entry, but paper remains the mainstream for reliability. When I took the driving test, the examiner mentioned that printing helps avoid suspicion of cheating. In practice, saving a copy on your phone risks accidental deletion or format corruption. Printing it out, sticking it in a folder, and carrying it with you ensures a smooth exam experience. The pre-exam checklist includes the voucher, ID card, etc., to confirm everything is ready. If the print shop is too far, you can schedule an online delivery in advance for convenience. Safety first—don’t lose big for small gains.

Was this review help?
14
Share
Expand All
More Q&A

Can the Modification of Wide Body Kit Be Registered?

Modifying a car with a wide body kit can be registered. First, submit a vehicle modification application to the local traffic police department, detailing the parts to be modified, a schematic diagram, and the reason for the modification. After the modification is completed, the changes must be registered. The registration process requires the following steps: First, apply for a modification registration at the vehicle management office. A decision on whether the modification is approved or not will be made within one working day from the date of application. If the vehicle management office approves the wide body kit modification, you can proceed with the modification. After completing the modification, the owner must return to the registration office to submit the original and a copy of the vehicle owner's ID, the vehicle registration certificate, the vehicle license, and the "Vehicle Modification Registration Application Form." The "Vehicle Registration Form (Supplementary Sheet)" and a photo of the vehicle must also be submitted to the local traffic police department's vehicle management branch. According to relevant traffic laws, modifications such as changing the vehicle color by more than one-third of the original, replacing the engine number, altering the chassis number, changing the company name (if the organization code remains the same), or relocating the registration must be reported to the vehicle management department at the place of registration for modification registration.
102
Share

What brand of engine oil is suitable for the Ford Escort?

Ford Escort vehicles can use Mobil brand 5W-30 engine oil. The Ford Escort uses Ford's semi-synthetic engine oil, but owners can also opt for full synthetic oil, with the oil grade being 5W-30. 5W-30 represents the oil grade, where the number before the W indicates the minimum operating temperature of the oil. For example, 5W can withstand temperatures as low as -30 degrees Celsius. The W can be categorized into 0W, 5W, 10W, 15W, etc. The smaller the number, the better the low-temperature fluidity, allowing the oil to perform better in cold conditions. The number after the W indicates the oil's viscosity at 100 degrees Celsius, with grades such as SAE20, 30, 40, etc. The higher the number, the higher the viscosity. Engine oils are specifically classified into 4 types for summer use, 6 types for winter use, and 16 types for all-season use. Summer oils are graded as 20, 30, 40, and 50, with higher numbers indicating higher viscosity and suitability for higher temperatures. Winter oils are graded as 0W, 5W, 10W, 15W, 20W, and 25W. The symbol W stands for Winter, and the smaller the number before the W, the lower the low-temperature viscosity and the better the low-temperature fluidity.
120
Share

What to Do When You Find Yourself Driving in the Wrong Direction on the Highway?

If you find yourself driving in the wrong direction on the highway, the solution is to immediately pull over to the emergency lane, turn on the hazard lights, and set up a warning sign at least 150 meters away in the direction of oncoming traffic. All passengers should move to a safe area outside the guardrail, call the traffic police, and wait for their on-site assistance. Important precautions for highway driving include: 1. Seat Belts: Both the driver and front-seat passenger must fasten their seat belts, and the driver should not use a mobile phone while driving; 2. Steering Wheel: Avoid sudden turns of the steering wheel at high speeds; 3. Lane Changes: Do not change lanes arbitrarily. When changing lanes or overtaking, always use the turn signal in advance; 4. Lane Discipline: Overtaking should only be done using adjacent lanes, and you must return to the driving lane immediately after overtaking. Do not drive straddling or pressing the lane divider; 5. Following Distance: Maintain a distance of at least 100 meters from the vehicle ahead. When driving below 100 km/h, the distance can be appropriately reduced but should not be less than 50 meters.
110
Share

What Are the Consequences of Modifying Coilover Suspension?

After installing coilover suspension, there will be obvious abnormal noises, and oil leakage may also occur. Over time, this can have a significant impact on the vehicle. Reasons for abnormalities in modified coilover suspension: Inconsistent height: If the consistency of the four suspensions is altered without proper knowledge, it can backfire, not only affecting the vehicle's chassis but also posing safety hazards while driving; Excessively low height: Due to the excellent adjustability of coilover suspension, if the owner blindly pursues a lower stance and sets the suspension height too low, the chassis is highly likely to scrape the ground during driving, leading to damage; Overly soft suspension: Some owners may adjust the damping of the coilover suspension to a very low level in pursuit of comfort. This can lead to instability in the vehicle's center of gravity at high speeds and a significant risk of rollover during emergency maneuvers. Precautions for modifying coilover suspension: Adjusting the strut height can affect the vehicle's height. The spring stiffness is related to the K-value—the higher the K-value, the stiffer the spring, and vice versa. Adjusting the damping can slow down the compression and rebound speed of the spring, eliminating excess vibrations. Generally, there is a damping adjustment knob at the bottom of the spring, which can be adjusted in 8, 16, or 32 stages. The ultimate goal is to make the suspension stop moving as quickly as possible. When adjusting the spring length, it is essential to preload it first. A preload of 2mm-8mm is generally appropriate. Over-compressing the spring can make it too short and lose elasticity.
113
Share

What are the regulations for retaining the original license plate when changing cars in Guangzhou?

In Guangzhou, the original license plate can be retained for six months after changing cars. If the original license plate number has been held for more than three years, the license plate number can be retained, allowing the car to be changed without changing the number. However, the new car must be purchased and registered within six months after the old car is deregistered. To retain the original license plate quota for the new car, the transfer procedures for the old car must first be completed, followed by an application to the vehicle management department for approval to retain the original license plate quota. Currently, the waiting time is approximately one month. Below is additional information: 1. Methods for registering a license plate: continue using the original motor vehicle license plate number, computer-automated selection (ten options to choose one), self-selection according to the motor vehicle license plate standard regulations (only applicable to small car license plates), internet self-selection (only applicable to small car license plates), and auction of small car license plates. 2. Notes: To retain the quota when changing cars, the old car must first be transferred. When selecting a license plate, please note: the selected license plate is only applicable to small cars (blue plate cars); during the registration of transfer registration business, the new owner's name should be filled in the motor vehicle owner column, and it should be confirmed that traffic violations and accidents have been processed.
102
Share

How to Add Water to a Car's Radiator?

Car radiators are typically located behind the air conditioning condenser, and the radiator cap can be seen by opening the engine compartment. The radiator is a key component in the car's cooling system, functioning to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket in a continuous cycle, thereby achieving heat dissipation and temperature regulation. Car radiators require antifreeze, whose full name is antifreeze coolant. The role of antifreeze is to cool rather than prevent freezing. When the engine starts running, the car's temperature begins to rise. If the vehicle remains at high temperatures, it can be dangerous and may even lead to explosion issues. Antifreeze is used to cool the car down. It is important to note that you should not add water to a car's radiator because everyday water contains impurities. If impure water circulates in the engine, especially during the major cycle when it flows into the cooling box behind the intake grille, it can produce scale that clogs the cooling system. This can lead to reduced engine power, increased wear, and high temperatures causing water to evaporate easily, resulting in a lack of coolant in the system. This can cause cylinder scuffing, cylinder head deformation, and in severe cases, engine failure. When adding antifreeze to the car radiator, check the scale. There are minimum and maximum marks inside the radiator when adding—usually, filling to the middle is sufficient, and it should not be filled to the top. The frequency of adding antifreeze depends on your driving habits, but generally, it should be added every 20,000 kilometers.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.