···
Log in / Register

Is driving at 100 km/h in an 80 km/h speed limit tunnel considered speeding?

3 Answers
MacBennett
09/08/25 7:01am
Tunnel speed limit 80 driving to 100 is speeding, whether driving at 100 km/h in a highway tunnel constitutes speeding depends on the speed limit signs before entering the tunnel. Generally, the speed limit in tunnels is 80 km/h. Speeding refers to the driver operating a vehicle at a speed exceeding the legal or regulatory speed limit. Turbine overspeed accidents are major catastrophic incidents caused by faults in the turbine's speed control and protection systems, as well as inherent defects. Driving at 100 km/h on a road with an 80 km/h speed limit falls into the range of exceeding the speed limit by more than 10% but less than 20%. According to the new traffic regulations, for violations where the speed exceeds the limit by less than 50% on an 80 km/h speed limit road, traffic police will only issue a warning without a fine or penalty points. The dangers of speeding include an increased risk of rear-end collisions and rollovers. Increased risk of rear-end collisions: Data shows that on dry, level roads, the braking distance is approximately 70 meters at 80 km/h, 101 meters at 100 km/h, and 173 meters at 140 km/h! When the vehicle ahead brakes suddenly in an emergency, a following vehicle in the same lane traveling at excessive speed is highly likely to cause a rear-end collision. Increased risk of rollovers: Speeding deteriorates vehicle handling stability, especially when navigating curves, where centrifugal force can cause the vehicle to skid or tilt outward from the turning center. Excessive centrifugal force makes the vehicle extremely difficult to control, even leading to loss of control. On roads with low surface friction coefficients, this can result in skidding or collisions. On roads with high surface friction coefficients, it may lead to rollovers or other accidents.
Was this review help?
13
3
Share
MacHarrison
09/20/25 5:30am
I've been driving for decades and am very familiar with speed limit regulations in tunnels. The speed limit in tunnels is usually 80 kilometers per hour, and driving at 100 kilometers per hour is definitely speeding. Tunnels have special conditions: dim lighting, stale air, and very poor visibility. Driving too fast reduces reaction time, increasing the risk of rear-end collisions or hitting the wall. I remember once seeing a car lose control and overturn in a highway tunnel because it was going too fast, injuring several people. Nowadays, traffic regulations are strict: speeding over 20 kilometers per hour results in a fine starting at 200 yuan and significant demerit points. Speed limits aren't set arbitrarily; they're based on safety tests and accident data. I recommend keeping an eye on the dashboard while driving and not risking your safety and others' for a momentary thrill. Slowing down in tunnels is what smart drivers do.
Was this review help?
7
0
Share
Expand All
MacAriana
11/03/25 5:53am
As a frequent long-distance commuter, I must say driving at 100 km/h in an 80 km/h speed-limited tunnel definitely counts as speeding. I've done the math: speeding 20 km/h theoretically saves you just a few minutes, but getting caught by a speed camera means at least a hundred yuan fine plus penalty points; if an accident occurs, repair costs become a bottomless pit, and insurance rates will rise. The air in tunnels doesn't circulate well, emergency braking distances double compared to open roads - the risks are too high. Last time I passed through a tunnel during smoggy weather, driving fast nearly made me hit the car ahead, scaring me into a cold sweat. Nowadays cars come with navigation alert functions - set it up and it automatically beeps to remind you to slow down when speeding. Speed limits exist to ensure everyone's safety; it's not worth gambling your life and money to save a few minutes.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What are the solutions for car window noise issues?

Solutions for car window noise issues are: 1. Clean the dust-proof strips on the doors and windows, and spray dashboard wax into the glass channels on both sides; 2. Visit a 4S shop to clean the window lift motor. Car glass maintenance methods: 1. Use specialized or suitable wiper blades and replace them in time to prevent scratching the windshield; 2. Use automotive-specific glass cleaner to add lubrication and reduce wear on the windshield; 3. Avoid using wipers to remove debris on the windshield; use a towel instead; 4. When it rains, use the wipers to wipe off dust and other particles; 5. Use static cling film for labels on the windshield to prevent scratches when removing adhesive; 6. Cover the windshield when parking outdoors in winter to prevent frost damage; 7. Avoid driving behind large vehicles to prevent flying stones from hitting the windshield.
16
5
Share

Which three buttons restart the screen of the Audi A3?

Audi A3 screen restart is the MENU button, the large round button, and the top-right button among the four function buttons. Press them together for three seconds and then release to restart the system. Below is an introduction to the Audi A3: 1. Power: The A3's engine is equipped with a DSG dual-clutch manual-automatic transmission, which is typically found in top-performance vehicles. It provides extremely smooth and high-speed gear shifting, delivering perfect power connection for the A3. 2. Exterior: The A3 inherits the style of the new generation of Audi products, redesigning the front end with a shield-shaped emblem. The use of lighting accents provides a more dynamic style, making the A3 look very confident.
1
2
Share

Can an Electronic Driver's License Be Used for Car Rental?

An electronic driver's license cannot be used for car rental. Below are the relevant details: 1. Introduction: The full name of a driver's license is a motor vehicle driver's license, also known as a "driver's license," which is a certificate required by law for individuals to operate motor vehicles. 2. Expansion: Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle recklessly may lead to traffic accidents. Generally, individuals cannot drive on the road without a license. However, for those who have already mastered safe driving techniques, the document that permits them to drive on the road is the "driver's license." This indicates that a driver's license is a type of "permission certificate."
11
3
Share

Which country is Tesla from?

Tesla is an American car manufacturer, with models including: Tesla Roadster, Tesla Model S, Tesla Model X, Tesla Model Y, and the basic Tesla Model 3, among others. Tesla, Inc. is an American electric vehicle and clean energy company, primarily engaged in the production and sales of electric vehicles, solar panels, and energy storage systems. The company was named Tesla in honor of the physicist Nikola Tesla. Taking the Tesla Model Y as an example: this vehicle is a compact SUV with dimensions of 4750mm in length, 1921mm in width, and 1624mm in height, and a wheelbase of 2890mm. In terms of suspension, the car features a combination of double-wishbone independent suspension and multi-link independent suspension.
1
0
Share

Is the Accord's transmission AT or CVT?

The transmission of the Accord is CVT. Here are the differences between CVT and AT transmissions: 1. Demand aspects. Both transmissions have their own strengths. If you seek sporty excitement, the AT transmission can meet your needs; if you prioritize fuel economy, the CVT transmission can fulfill that requirement. 2. Reliability. The AT transmission is more reliable than the CVT. Here is an introduction to the Accord 2021 260TURBO Luxury Starry Sky Limited Edition: 1. Powertrain. Equipped with a 1.5T turbocharged engine, the maximum power is 143kw, paired with a CVT continuously variable transmission. 2. Body dimensions. The length, width, and height are 4893mm, 1862mm, and 1449mm respectively, with a wheelbase of 2830mm.
3
4
Share

Is it necessary to replace the CV joint if it makes noise?

If the CV joint is making noise solely due to lack of lubrication, you can try applying lubricant inside the CV joint. If the noise disappears and the CV joint operates smoothly afterward, replacement is unnecessary. However, if the CV joint is severely worn and the external rubber component is completely damaged, the CV joint should be replaced. There are two common types of CV joints used in passenger cars: 1. Fixed-type CV joint: Its characteristic is that it only allows relative rotation between the driving and driven shafts during torque transmission without axial displacement. It is typically used near the wheel, commonly referred to as the outer CV joint. 2. Sliding-type CV joint: Its characteristic is that it not only allows relative rotation between the driving and driven shafts during torque transmission but also permits axial displacement. It is usually used near the drive axle, commonly known as the inner CV joint.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.