···
Log in / Register

Is a new car inspected every two years?

6Answers
Bailey
07/29/2025, 07:48:13 AM

New cars are not inspected every two years but every six years, with the inspection compliance label renewed every two years. Here are the details: Six-year inspection exemption: This means the vehicle is exempt from on-site inspection, but it does not mean no inspection is required at all. Owners still need to apply for the inspection compliance label at the vehicle management office every two years. Vehicles not eligible for exemption: Vehicles involved in accidents causing casualties are not eligible for exemption. Vehicles that have not been registered for a long time after purchase (those not registered within four years from the date of manufacture) are also not eligible. Non-commercial passenger vehicles that had reached their inspection expiration date before September 1, 2014, but failed to undergo inspection on time cannot enjoy the exemption policy and must still undergo inspection at designated centers as per original regulations.

Was this review help?
113
Share
DiJaxson
08/13/2025, 04:40:14 PM

For newly purchased vehicles, the policy indeed requires an inspection every two years. Specifically, within the first 6 years after the vehicle's initial registration, you only need to apply online for an exemption inspection sticker every two years, without having to visit an inspection station for an on-site check. This saves a lot of time and hassle. I think this design is quite reasonable because the mechanical condition of a new car is usually excellent in the first few years, so simply applying for the exemption is sufficient. However, don’t mistakenly think you can ignore it completely—when the time comes, you must complete the process on the Traffic Management 12123 app, submit the required materials, and wait for the electronic sticker to be issued. Failing to do so on time may result in fines or affect insurance renewal. Additionally, I recommend that fellow drivers take the opportunity to check basic vehicle conditions, such as lights and tires, to ensure safe driving. Starting from the 7th year after the new car period ends, an annual on-site inspection will be required.

Was this review help?
10
Share
Expand All
JudahRose
10/08/2025, 02:37:49 AM

When I first started in the industry, I also had this question. New vehicles indeed require inspection every two years for the first six years, but you only need to apply for the exemption mark online without visiting the inspection station. For me, this is very convenient as it saves the time spent queuing and dealing with the hassle. Beginners might worry about forgetting the schedule, but I suggest setting a phone reminder or marking the expiration date on the insurance policy to avoid fines for overdue inspections. If the vehicle has modifications or has been involved in an accident, this policy might not apply, so it's best to check the details of local traffic regulations just in case. More communication often ensures safety.

Was this review help?
10
Share
Expand All
Brooke
11/21/2025, 02:57:14 AM

Having been in the industry for so long, I understand the rule of biennial inspections for new vehicles, specifically the exemption application process during the first six years. Simply put, you need to submit vehicle information and insurance policy screenshots on the transportation service platform to apply for an electronic inspection decal. If the system automatically verifies and approves, no physical inspection is required. Failing to meet the deadline may result in a fine of 200 yuan or more, and could even lead to insurance renewal denial. Therefore, it's essential to complete the process promptly.

Was this review help?
4
Share
Expand All
DeKyle
01/11/2026, 09:45:16 PM

Policymakers stipulate that new vehicles undergo inspection every two years, which in practice means an online application for a no-inspection emblem within the first six years, exempting owners from visiting inspection stations. This design stems from reforms aimed at simplifying procedures and reducing the burden on car owners. I often follow such changes and find them commendable. However, remember to prepare your insurance policy and ID information for the APP operation, and ensure the electronic emblem is affixed to the front windshield to avoid issues during random checks. If you exceed the deadline, a re-inspection and fine will be required. A prudent approach is to start preparing the materials half a month in advance to ensure a smooth and error-free process.

Was this review help?
17
Share
Expand All
SanPaislee
04/08/2026, 01:45:15 AM

As a seasoned driver, I know that new cars require biennial inspections for the first six years, mainly involving the application for an exemption inspection decal. But don't underestimate it—handle it online before the deadline to save both money and hassle. I suggest fellow drivers take this opportunity to self-check key vehicle components like brakes and lights, addressing any hidden issues early for enhanced safety. Late handling incurs higher costs and may affect insurance claims. Developing a habit of regular vehicle inspections can extend your beloved car's lifespan.

Was this review help?
3
Share
Expand All
More Q&A

What is the fuel consumption of the Prado 2700?

In congested urban areas, the Prado 2700 has an average fuel consumption of around 14 liters per 100 kilometers, while in suburban or highway conditions, it is typically around 10 liters. Overall, the combined fuel consumption is approximately 13 liters. Below is some related information about fuel consumption: 1. Fuel consumption, abbreviated as fuel usage, refers to the amount of fuel (in liters) consumed by a vehicle over a certain distance. The unit of fuel consumption is L/100km, which represents the liters of fuel consumed per 100 kilometers. A lower number indicates better fuel economy. 2. Fuel consumption is commonly measured through road tests. The constant-speed 100-kilometer fuel consumption test is one of the simplest road tests. According to JB3352—83, the test conditions for constant-speed fuel consumption are as follows: flat, dry, and clean cement or asphalt roads with a longitudinal slope of less than 0.1% (at least less than 0.3%) and a straight road section longer than 1500 meters. The climatic conditions should be: temperature between 0°C and 35°C, wind speed less than 3 m/s, and relative humidity between 50% and 90%.
104
Share

What is the 0-100 acceleration time of the Lincoln Aviator?

Lincoln Aviator accelerates from 0 to 100 km/h in just 6 seconds. The Aviator is equipped with a 3.0L V6 turbocharged engine and a new 10AT transmission system, which enhances its performance. It also comes standard with a four-wheel drive system. Below is some related information about the Lincoln Aviator: 1. The dimensions of the Lincoln Aviator are 55080 mm in length, 2022 mm in width, and 1759 mm in height, with a wheelbase of 3025 mm. 2. The Lincoln Aviator offers one powertrain option, featuring a 3.0T V6 twin-turbocharged engine with a maximum power of 261 kW and a maximum torque of 553 Nm.
117
Share

What causes both the EPC and engine lights to illuminate simultaneously?

When both the EPC and engine lights illuminate simultaneously, it indicates a malfunction in the vehicle's mechanical and electronic systems. Generally, there are two possible reasons for the EPC light to come on. One is a dirty throttle body, which should be cleaned. The other is malfunctioning brake lights, requiring inspection of the brake light switch and wiring. Additionally, poor fuel quality can also trigger the EPC warning light. Below is relevant information about the throttle body: 1. The throttle body is a crucial component that supplies air to the car engine, primarily controlling the air intake based on the engine's load. Prolonged driving can lead to carbon buildup in the throttle body. When the throttle body becomes dirty, it may cause the engine to stall while driving. 2. When cleaning the throttle body, it's possible not to disassemble it, but it's essential to thoroughly clean the air intake sealing areas. The idle speed control valve must be removed for proper cleaning. There are pros and cons to both disassembling and non-disassembling methods for cleaning fuel injectors. Generally, service stations recommend non-disassembly cleaning to avoid unnecessary expenses, such as replacing sealing rings or other gaskets after disassembly, or potential issues like oil or air leaks during the disassembly and reassembly process, which could waste the owner's time.
111
Share

Does the Fista have a China VI compliant model?

Fista has China VI compliant models. China VI refers to the vehicle's exhaust emission standards, officially known as the National Sixth Stage Emission Standard for Motor Vehicle Pollutants. The China VI emission standard is divided into two phases: China VIa and China VIb. The Fista measures 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm, and features a front-engine, front-wheel-drive layout. It is powered by a 1.6T turbocharged engine paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power of 140kW and a peak torque of 265Nm. Additionally, the engine is equipped with direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
113
Share

How to cancel the maintenance wrench on Southeast Motor DX3?

Southeast Motor DX3 method to cancel the maintenance wrench: Turn on the ignition switch, press and hold the mode button for more than 5 seconds while the oil symbol is displayed on the combination meter information display. After the oil symbol starts flashing, quickly press the mode button more than 5 times. The oil symbol will flash 3 times and then turn off, the maintenance reminder alarm light will go out, and the zero reset operation is completed. The length, width, and height of the Southeast Motor DX3 body are 4354mm, 1840mm, and 1654mm respectively, with a wheelbase of 2610mm. The car is front-wheel drive and is equipped with an engine with a maximum power of 88kw and a maximum torque of 143nm.
109
Share

What are the items included in the first maintenance?

Items included in the first maintenance of a car: 1. Change engine oil and oil filter, clean the air filter. 2. Check whether the coolant level is normal. 3. Inspect the car's brakes and whether there are any scratches on the chassis components. 4. Check if the power steering fluid level is normal and if there are any oil leaks at the oil pipe joints. 5. Inspect the condition of the generator, air conditioning, water pump, and the aging and tension of the belts. 6. Check the tire pressure and wear condition. Methods for car maintenance include: 1. Turn on the ignition before starting the vehicle. 2. Regularly check the brake pads. 3. Let the car idle for about a minute when starting cold. 4. Refuel in time before the oil light comes on. 5. Do not drag the gear while driving. 6. Avoid sudden acceleration when starting and shift gears when reaching a certain RPM.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.