···
Log in / Register

How to Turn on the Wipers of a Volkswagen Car?

3 Answers
Rex
09/06/25 3:05am
To turn on the wipers of a Volkswagen car: 1. Turn on the ignition switch; 2. Locate the lever on the right side behind the steering wheel; 3. Push it down once for the slow wiping mode (first gear), push it down again for the fast wiping mode (second gear), and pull it towards the steering wheel to spray windshield washer fluid. Volkswagen models include: Volkswagen Magotan, Volkswagen Phaeton, Volkswagen Golf, Volkswagen Phideon, Volkswagen Tayron, etc. Taking the 2020 Volkswagen Magotan as an example, it is a mid-size car with the following dimensions: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, fuel tank capacity 66 liters, and curb weight 1445kg.
Was this review help?
20
1
Share
VanPatrick
09/18/25 3:09am
I've been driving a Volkswagen for almost ten years, and the wiper operation is quite straightforward. There's a control stalk on the right side of the steering wheel. Gently pushing it up once activates the intermittent wipe mode, and the interval speed can be adjusted via the rotary knob at the end of the stalk. Pushing it up a second time engages the low-speed continuous wipe, suitable for moderate rain. Pushing it to the third position is the high-speed setting, which works best during heavy rain. Pulling the stalk downward sprays washer fluid while triggering two quick wipes. Some newer models like the Golf or ID series feature automatic rain-sensing wipers—just press the Auto button on the stalk after starting the car, and the system will detect raindrops and adjust the wiping speed accordingly. It's important to regularly check the condition of the wiper blades; aged or damaged blades can compromise visibility, which is dangerous. I make it a habit to inspect them every six months and replace them before the rainy season to ensure clear vision. Rear wipers are common in SUV models, and their switch is a button at the end of the stalk—just press it to activate.
Was this review help?
1
3
Share
Expand All
ParkerRose
11/01/25 3:36am
I remember when I was learning to drive, my instructor taught me the Volkswagen wiper operation: first, locate the lever on the right side of the steering wheel. The first step is to push it all the way up to the first position for intermittent wiping, where you'll see the wipers move every few seconds and then pause. Push it twice to the second position for low-speed continuous wiping. Pushing it up a third time activates the high-speed mode, capable of handling heavy rain. Pulling the lever down sprays water to clean the front windshield. If the car is a top model with automatic functionality, pressing the Auto button on the lever after starting the engine will light up a green indicator, enabling smart operation. I think beginners should practice simulating these operations a few times on sunny days to avoid panic during rainy weather. Rear wipers are usually found on hatchbacks or the Touareg, activated by a separate button. It's important to regularly top up the windshield washer fluid, as dry spraying can damage the motor.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What are the differences between the Corolla Elite and Luxury trims?

The differences between the Corolla Luxury and Elite trims lie in their wheel sizes: the Luxury trim comes with 16-inch wheels, while the Elite trim features 15-inch wheels. Here are some relevant details: 1. The Corolla is a compact car produced by Toyota, with body dimensions of 4630mm in length, 1775mm in width, and 1480mm in height, and a wheelbase of 2700mm. 2. In terms of exterior design, the Corolla presents a balanced and dignified appearance, making it well-suited for family use. The interior adopts a simple overall style, with a conventional dashboard design, spacious and comfortable seats, and effective air conditioning.
14
0
Share

Can a 12V battery still be used when it drops to 9V?

When a 12V battery drops to 9V, it can still be charged. If the voltage can be restored to 12V, it indicates that the battery can continue to be used. The precautions for battery usage and replacement methods are as follows: Precautions for battery usage: Regularly check the electrolyte level. If it falls below the minimum level mark, replenish it immediately. Continued use in this state will not only accelerate the aging of internal components and shorten the battery's lifespan but may also cause explosions. Avoid exposing the battery to open flames or sparks caused by short circuits near the battery. When charging the battery, carefully read the warning labels and remove the battery from the machine. The electrolyte, dilute sulfuric acid, is corrosive and should not come into direct contact. If electrolyte comes into contact with eyes, skin, or clothing, rinse thoroughly with clean water immediately. If electrolyte enters the eyes, seek medical treatment after rinsing with water. Regular maintenance and care of the battery are essential. Battery replacement method: Open the engine hood, remove the red positive terminal first, followed by the black negative terminal. Unscrew the battery's mounting bolts and install the corresponding new battery. If the electrolyte level is low, replenish it with distilled water or a dedicated replenishing solution. During daily driving, frequently check the ventilation holes on the battery cover for proper airflow, inspect the positive and negative terminals for oxidation, and examine all circuit parts for signs of aging or short circuits. If any issues are found, turn off all electrical devices.
7
5
Share

Do You Need to Keep Your Foot on the Accelerator While Driving?

Whether you need to keep your foot on the accelerator while driving depends on the driving environment. If you do not need to slow down or stop, your right foot should remain on the accelerator pedal. If you need to slow down or stop, you should not press the accelerator but instead step on the brake pedal. Similarly, when preparing to stop, you do not need to press the accelerator; your right foot should be on the brake. After coming to a complete stop, if you do not intend to turn off the engine, there is no need to press the accelerator pedal—the engine will maintain idle speed. Below are some tips for correctly using the accelerator: Use the heel of your right foot as a pivot point, with the ball of your foot gently pressing the accelerator. Avoid applying too much force when pressing or releasing the accelerator; instead, press lightly and lift slowly to prevent flooring the accelerator. When starting, avoid pressing the accelerator too hard. Coordinate the release of the clutch with pressing the accelerator, ideally maintaining a semi-engaged state. Adjust the accelerator according to road conditions while driving. Avoid flooring the accelerator when going uphill; when using a low gear, it is generally better to press the accelerator halfway. On steep slopes, do not press the accelerator all the way down. Control the accelerator based on the engine RPM while driving to maintain an economical speed.
6
3
Share

What does it mean when a Mercedes-Benz displays 'Park and Keep Engine Running'?

When a Mercedes-Benz displays 'Park and Keep Engine Running,' it indicates that the battery charge is insufficient or the system is not detecting any power from the battery. In such cases, you can first check if the battery terminals are loose and try tightening them. Here are some battery usage precautions: Turn off lights and audio before parking and shutting off the engine: Before shutting off the engine after driving, always turn off the lights, audio system, and other electrical components first. This prevents unnecessary battery drain. Pay special attention to small lights, turn signals, etc., and double-check after exiting the vehicle. Leaving lights on for extended periods can be very harmful to the battery. Also, when driving at night, start the vehicle first before turning on the lights and audio. Avoid not turning off the air conditioning before shutting off the engine: The air conditioning consumes a significant amount of power. Some drivers have the habit of not turning off the air conditioning before shutting off the engine. This causes the air conditioning to automatically start the next time the vehicle is turned on, leading to an instant high power load that can damage the battery over time. Regularly clean the battery: Use a damp cloth to periodically wipe the exterior of the battery, removing dust, grease, white powder, and other contaminants that can cause leakage. Regular cleaning prevents excessive buildup of white acidic corrosion on the battery terminals and extends the battery's lifespan. You can also apply specialized grease to the battery terminals for added protection.
13
0
Share

Does the Dash Cam Record Continuously?

The dash cam does not record continuously. It relies on the vehicle's power supply to operate, so when the car is turned off and power is cut, the dash cam stops working. Dash cams without parking monitoring typically draw power from the car's cigarette lighter or USB port. When the vehicle is parked and the ignition is turned off, removing the key causes the car's electrical circuits to shut down, which automatically powers off the dash cam. Dash cams equipped with parking monitoring usually connect via a voltage reduction cable to the ACC fuse box for power. After the vehicle is parked and turned off, they enter an energy-saving sleep mode. If the car experiences an impact or detects movement in front, the parking monitoring function is immediately activated, capturing footage of the surroundings. Dash cams feature an incident lock function. In the event of an accident, the sudden violent shaking of the car triggers the dash cam to automatically recognize and lock the corresponding video segment. Locked videos can only be deleted manually from the locked recordings section; otherwise, they are preserved indefinitely.
19
5
Share

What are the differences between Jetour X70S and X70?

The differences between Jetour X70S and X70 are as follows: 1. Price: The official guide price of X70S is higher than that of X70. 2. Exterior: The X70 features a horizontal bar-style grille, while the X70S has a starry matrix-style grille. The X70S also adds red sport brake calipers. 3. Body dimensions: The X70 measures 4720/1900/1710mm in length/width/height with a wheelbase of 2745mm; the X70S measures 4750/1910/1710mm with the same wheelbase of 2745mm. 4. Interior: The X70S adopts a floating central control screen, a through-type air vent, and a 12.3-inch intelligent LCD instrument panel. The seats in the X70S are more comfortable than those in the X70. The X70 features a dark interior style with a 10-inch LCD display on the central console and air vents on both sides. 5. The X70S has a sportier chassis tuning with a firmer suspension setup.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.