How to Straighten the Car Body Before Right Reverse Parking?

Can Scratches on Hard Plastic Interior Trim Be Repaired?

Yes, scratches can be repaired. Here are solutions for fixing scratches on plastic interior trim: 1. Toothpaste Repair: Toothpaste is commonly used to repair scratches on hard plastic interior trim. The chemical components in toothpaste have a certain restorative effect. For minor scratches, apply toothpaste to the affected area and gently rub to remove the scratches, leaving the plastic looking shiny and new. 2. White Vinegar Removal: White vinegar can also effectively remove scratches. First, find an empty spray bottle, pour in some white vinegar, add water, and shake well. Spray the solution onto the scratched area, let it dry, and then wipe with a dry towel. 3. Repair Agents: Most auto repair shops carry specialized scratch repair sprays or agents. Simply spray the product onto the scratched area and wipe with a towel. However, for deep scratches, DIY repair is not recommended as general repair methods may not be effective.

13

3

Share

What does srsairbag mean?

srsairbag refers to the Supplemental Restraint System airbag. The airbag system mainly consists of components such as sensors, a microprocessor, a gas generator, and the airbag itself. The sensors and microprocessor are used to assess the severity of a collision, transmit and send signals. The gas generator, upon receiving the signal, ignites the solid fuel to produce gas that inflates the airbag, causing it to expand rapidly. Precautions for using the airbag system: Do not place objects in front of, above, or near the airbag, as these items may obstruct the inflation of the airbag or be ejected during an emergency, posing a danger. The airbag should be used in conjunction with seat belts. Locations of airbags in different positions: The driver's side airbag is installed in the steering wheel; the passenger side airbag is usually located in the dashboard. The airbag sensors are individually assembled on the left, right, and center of the cabin spacing panel. The central airbag sensor and the airbag system software are installed together with the electronic control device.

4

1

Share

What is the New Energy Vehicle Subsidy Policy?

New energy vehicle subsidies are decreasing year by year. The following is a detailed introduction to the new energy vehicle subsidy policy: Yearly Reduction: From the subsidy standards, it shows a yearly reduction from 2020 to 2022. The subsidy phase-out is gradual and moderate in intensity and pace. In principle, the subsidy standards for 2020-2022 are reduced by 10%, 20%, and 30% respectively compared to the previous year. Subsidy Regulations: Pure electric passenger vehicles with a range of less than 300 kilometers receive no subsidy. Subsidies for pure electric passenger vehicles with a range of 300-400 kilometers (including 300 kilometers) are reduced. Subsidies for pure electric passenger vehicles with a range of over 400 kilometers (including 400 kilometers) are also reduced. For vehicles in urban public transport, road passenger transport, taxi (including ride-hailing), sanitation, urban logistics distribution, postal express, civil aviation airports, and official vehicles of party and government agencies that meet the requirements, the subsidy standard is reduced by 10% compared to 2020.

11

0

Share

What is the Difference Between Two-Stroke Oil and Four-Stroke Oil?

The difference between two-stroke oil and four-stroke oil lies in the formulation of the two oils. The structural design of two-stroke and four-stroke engines differs, leading to different requirements for the oil. Two-stroke engines do not require oil to withstand as high temperatures. More details are as follows: 1. Function of Engine Oil: Engine oil, also known as motor lubricant, serves to lubricate the engine, assist in cooling, and provide anti-corrosion and anti-rust protection. When the engine is operating, its internal components move at high speeds, reaching temperatures between 400°C and 600°C. Using lubricating oil helps reduce wear on these internal parts. 2. Composition of Engine Oil: Engine oil primarily consists of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for any performance shortcomings of the base oil. Engine oil extends the lifespan of engine components and improves harsh working conditions. Generally, engine oils on the market can be categorized into mineral oils and synthetic oils. The type of oil suitable for a car can be found in the vehicle's user manual.

1

3

Share

Is it normal for brake pads to heat up after running 10 kilometers?

It is normal, but it depends on the specific situation. Here is a detailed introduction to the relevant content: Automobile braking: The braking force generated by the friction between the brake pads and the brake discs slows down and stops the car. Everyone knows the principle that friction generates heat. During normal operation of the braking system, it is inevitable that heat will be generated due to the friction between the brake pads and the brake discs, and it is normal for the brake discs to become hot to the touch at this time. If the car is driving normally without any braking operation, and the brake discs become hot to the touch, it is not normal. Normal driving: Without any braking operation, the heating of the brake discs indicates that the brake discs and the brake pads are not completely separated, and there is still some friction between them. The distance between the brake pads and the brake discs should be adjusted. If the temperature exceeds the normal range and becomes excessively hot, it is possible that there is a problem with the components.

18

2

Share

What are the functions and purposes of barring a vehicle?

The primary function and purpose of barring a vehicle are to inspect its operational condition. Below are the detailed explanations: Barring procedure: First, the fuel supply should be cut off, and the start signal cable disconnected. Then, open the indicator cocks of each cylinder to blow out any moisture, oil, or impurities inside the pistons. Once it is confirmed that the diesel engine is in good condition, the diesel engine can be started. Before starting the diesel engine, it is essential to check the oil circuit, water circuit, air circuit, and electrical circuit related to the diesel engine. If no issues are found, the engine can be started. Machine pump barring: By barring the machine pump, check whether it operates smoothly without any jamming or abnormal noises inside, to prevent damage to the machine pump during startup or motor burnout due to excessive current. For some large units, barring is also used for warming up and lubrication before operation, preventing local overheating between the rotor and the body after startup, which could lead to body deformation.

15

1

Share

How to Straighten the Car Body Before Right Reverse Parking?

Can Scratches on Hard Plastic Interior Trim Be Repaired?

What does srsairbag mean?

What is the New Energy Vehicle Subsidy Policy?

What is the Difference Between Two-Stroke Oil and Four-Stroke Oil?

Is it normal for brake pads to heat up after running 10 kilometers?

What are the functions and purposes of barring a vehicle?

What does it mean when a vehicle's registration exceeds its validity period?

How Long Does It Take to Detect Wrong-Way Driving?

How to Handle an Expired Driving License Review?

Will Bird Droppings Corrode Car Paint?