How to Set Up the Edge's Rain-Sensing Wipers?
3 Answers
To set up the Edge's rain-sensing wipers, move the wiper switch to the automatic position. The system will automatically adjust the wiper speed based on the intensity of the rain. The function of rain-sensing wipers is to detect the size of raindrops via a rain sensor and automatically adjust the wiper speed, providing the driver with a clear view and enhancing convenience and safety during rainy conditions. Taking the 2021 Edge as an example, its body dimensions are: length 4878 mm, width 1925 mm, height 1734 mm, with a wheelbase of 2850 mm, a fuel tank capacity of 69 liters, and a trunk capacity ranging from 947 to 2039 liters.
Setting up the Edge's rain-sensing wipers is quite intuitive, and I often help others with this in community forums. First, locate the wiper control stalk on the right side of the steering wheel, which typically has rotating and toggle functions. After starting the vehicle, push the wiper stalk to the topmost "AUTO" position to activate the automatic rain-sensing system. Then, adjust the sensitivity by turning the small knob on the stalk—rotate left to decrease (ideal for light rain) and right to increase (ideal for heavy rain). Next, spray some water on the windshield to test; if the wipers activate automatically, the setup is successful. Remember, the sensor is hidden under the small dot above the windshield—keep it clean to avoid false readings. I once helped a neighbor with this, and it took less than a minute. Not only does it save time, but it also improves visibility in the rain and reduces accident risks. I recommend checking it monthly and gently wiping the sensor with a soft cloth to extend its lifespan.
I recently tried setting up the automatic wipers on my Ford Edge by myself. As a beginner, I was a bit clumsy at first. Initially, I couldn't figure out which button was for AUTO mode and ended up toggling switches randomly, which startled me when the wipers moved unexpectedly. Later, I found the instructions in the manual: after starting the vehicle, push the wiper stalk to the highest position marked with a raindrop icon, then rotate the adjacent adjustment ring. I tested it myself—turning left for lower sensitivity and right for higher sensitivity. Then, I asked a friend to spray water for a test, and the wipers actually started working automatically! It felt incredibly simple, and now I don’t have to manually adjust them every time it rains. Bonus tip: Regularly check if the windshield is clean. If the sensor seems sluggish, it might be due to dust blockage—just wipe the sensor with a tissue. This way, you can stay more focused on the road while driving, avoiding the danger of fiddling with the wipers.
