How to reset the tire pressure light on the 2020 New Lingpai?
3 Answers
The first step is to press the one-touch start button to start the vehicle, then press the reset button on the right side of the steering wheel; Next, press the confirm button on the left side of the steering wheel to complete the tire pressure light reset.
First, check if the tire pressure of all tires has reached the recommended value on the door pillar label, usually inflated in the cold state. If the pressure is low, go and add air. After inflating, start your Lingpai engine, then find a reset button labeled TPMS or similar on the center console or the lower left side of the steering wheel. Hold this button for a few seconds until the tire pressure light goes off. If you can't find the button, you may need to look for the settings in the dashboard menu. If you can't figure it out, don't worry, just drive to the 4S shop and let them use a diagnostic tool to fix it. Remember to check the tire pressure regularly for safe driving.
Fellow car enthusiasts know that when the tire pressure warning light comes on, it's the system alerting you to abnormal pressure. Resetting the 2020 Lingpai is quite simple: First, ensure all four tires are inflated to the standard pressure (cold tires are best), with the manual stating around 230 kPa for the front tires. Then, start the ignition, locate the reset button on the steering wheel, hold it down without releasing, and the light will flash and turn off. Some models may require accessing the i-MID system to select TPMS reset. Faulty sensors can sometimes cause false alarms, and if it's a sensor issue, you might need a replacement. It's recommended to check tire pressure every quarter and be extra thorough before highway trips. Driving safely ensures a smoother and more enjoyable ride.
