How to Reset the Maintenance Light on a 2016 Great Wall H7?
3 Answers
Great Wall H7 maintenance light reset steps are as follows: 1. Turn off the ignition switch to keep the engine in a shutdown state; 2. Press and hold the short-distance counter reset button below the tachometer; 3. Turn on the ignition switch and release the short-distance counter reset button; 4. When the 'SERVICE' indicator appears on the display, pull out the minute button on the clock; 5. Rotate the minute button to the right until the mileage appears on the display; 6. Turn off the ignition switch to complete the maintenance light reset. Relevant information about the maintenance light: 1. The function of the maintenance light is to record the mileage of some important components, acting like a timer in a sprint race, serving as a reminder for car owners and maintenance personnel. 2. Although the maintenance light is not directly related to the car's performance, it must be reset after maintenance. Otherwise, the owner cannot accurately know the usage time of new components during the next replacement.
I've been driving the Great Wall H7 for several years, and resetting the maintenance light is something I can easily do myself. The method is very simple: Sit in the car, don't start the engine, just turn the key to the ON position to power up the dashboard. Then press and hold the TRIP button near the steering wheel without releasing it. Wait for about 6 to 8 seconds, and the maintenance light will flash and then turn off, indicating a successful reset. I do this immediately after every oil change to prevent the light from staying on and misleading me about the maintenance schedule. If you don't reset it on time, the system might miscalculate the reminder cycle, delaying the next inspection, which could seriously affect the engine's lifespan in severe cases. The Great Wall H7 is a great car with user-friendly maintenance. Learning this trick saves a trip to the 4S shop and helps you get familiar with your car's dashboard operations. Regularly check tire pressure and oil condition, combined with the maintenance light reminder, to keep your car running smoothly.
Resetting the maintenance light is straightforward: turn the key to the ON position without starting the engine; locate the TRIP button on the dashboard, press and hold for 8-10 seconds until the light resets. On the 2016 H7 model, the button is typically near the center console—keep holding until it automatically turns off. I always reset it promptly after maintenance to prevent the system from incorrectly reporting the next service interval. Ignoring the light may mask actual issues like low oil levels or component wear. Relevant knowledge: the maintenance light calculates based on mileage, and regular resets ensure accurate service scheduling, extending engine health. The H7's design is user-friendly, making DIY resetting incredibly simple.
