···
Log in / Register

How to Adjust the Headlights of Haval F7?

3 Answers
Robin
08/31/25 3:12am
Haval F7's headlight adjustment method is: When the ignition switch is in ON mode, rotate the main light switch knob to the automatic light position, and the small lights and low beams will automatically turn on or off based on the brightness of the surrounding environment. Car headlights are not only related to a car owner's external image but also closely linked to safe driving at night or in bad weather conditions. The Haval F7 is equipped with L2-level autonomous driving and semi-automatic parking functions, enabling interaction between the car and the driver to assist in completing the driving journey more conveniently, safely, and quickly. The vehicle's semi-automatic parking function can independently explore parking spaces and park, requiring the owner to only control the throttle, brake, and gear to complete the process.
Was this review help?
19
5
Share
LeGemma
09/12/25 6:38am
I find adjusting the headlights of the Haval F7 quite straightforward, having tried it myself a few times. First, sit in the driver's seat. On the lower left dashboard near the steering wheel, you'll find the lighting control area. Locate the small dial or wheel marked for headlight height adjustment and gently rotate it to make changes. This design is quite user-friendly, allowing adjustments without needing to open the hood. For the optimal position: at night, park facing a wall or find a flat surface with the car about 5 meters away. The light beam should align horizontally on the ground—neither too high (which could dazzle oncoming drivers) nor too low (compromising visibility). If manual adjustment feels tricky or isn't possible, the top-tier Haval F7 features an automatic height adjustment system that optimizes beam level based on driving speed, offering great convenience. Regularly check for bulb aging and have technicians inspect during routine maintenance. Remember to start the engine before adjusting to avoid excessive battery drain. Safe driving starts with properly adjusted headlights for secure nighttime journeys.
Was this review help?
15
4
Share
Expand All
HaileyDella
10/26/25 7:28am
From my years of driving experience, headlight adjustment is a common task, and the Haval F7 does this well. Inside the cabin, the headlight height adjustment knob is usually located next to the light switch, making it easy to find. Simply turn it to adjust the beam height up or down. The biggest concern with manual adjustment is asymmetry—too high and it blinds pedestrians, too low and it compromises road visibility. I recommend finding an open area at night, parking the car, and checking if the high beam pattern is even. If there's no automatic function, there's also a backup adjustment screw under the hood, but be cautious—avoid using a large wrench to prevent damaging the lamp housing. Proper adjustment can extend bulb life and prevent short-circuit hazards. The Haval F7's lighting system is quite reliable overall. Making it a habit to check the height during every maintenance session significantly enhances safety and makes night driving more secure. Don’t skip this step to save time—even a slight misadjustment can lead to big trouble.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How to Deal with Glue Residue After Removing Window Tint Film?

Methods for handling residual adhesive from car window tint film are as follows: 1. The leftover adhesive from car window tint film can be wiped off using makeup remover oil or asphalt cleaner; 2. You can also use polyurethane thinner, commonly known as 811 cleaner, for wiping; 3. Lastly, another method is to use essential balm, which has fast volatile properties and low cost. Removing car window tint film requires certain steps and techniques, detailed as follows: 1. Peeling the film: First, lift a corner of the car window tint film, preferably using a fingernail or adhesive tape. If that doesn't work, consider using a blade to peel it. 2. Removing the film: With the help of hot air from a heat gun or hairdryer, use appropriate force and speed to slowly peel off the car window tint film. 3. Removing adhesive: If there is any residual adhesive from the glass film after peeling, clean it off with adhesive remover or cleaning agent.
1
2
Share

What are the causes of Camry idle vibration?

Camry idle vibration may be caused by the following reasons: 1. Severe engine carbon deposits - The most common cause of car vibration is dirty throttle valves or excessive carbon buildup in fuel injectors. When there's too much carbon deposit inside the engine, the gasoline sprayed by cold start injectors will be largely absorbed by these deposits; 2. Engine misfire - This mainly refers to one or more cylinders not working properly, manifested as: intermittent exhaust gas flow with noticeable exhaust pipe vibration, obvious engine vibration that can be felt, sometimes accompanied by "popping" sounds. This is mostly related to ignition coil failure; 3. Uneven air-fuel mixture in the engine can also cause idle vibration after cold start. The lower the temperature, the more fuel required for cold start, and the presence of carbon deposits will significantly affect whether cold start proceeds smoothly.
3
4
Share

Does idling the car with the heater on cause damage to the vehicle?

Idling the car with the heater on does not cause damage to the vehicle as long as the engine reaches its normal operating temperature. However, if the heater is turned on while the engine is still cold and has not reached its normal operating temperature, it can slow down the engine's warming process, leading to increased fuel consumption. Nevertheless, this does not harm the car. Below is some relevant information: 1. The fuel consumption when using the heater during idling depends on the car's displacement and engine tuning. For household cars, idling with the heater on for one hour consumes approximately 1 to 2 liters of fuel, though this may vary depending on the car model. 2. While idling with the heater on does not cause serious damage to the car, it can affect the passengers inside. Since the fuel does not burn completely during idling, carbon monoxide is produced. If the windows are not opened, the concentration of carbon monoxide inside the car can gradually increase, potentially leading to carbon monoxide poisoning for the passengers.
5
2
Share

Can I use my original license plate when changing to a new car?

When changing to a new car, you can retain your original license plate. For car owners who wish to keep their original plate, it is essential to ensure that the original plate has been used for more than one year. Only then will the plate be retained under the original owner's name during the transfer process. The retention period is one year. If the owner does not apply to reuse the plate within this period, it will automatically expire after one year, and the vehicle management office will reclaim the plate, making it unavailable for future use. The required documents for changing the car without changing the plate are as follows: 1. "Motor Vehicle Transfer or Registration Application Form"; 2. Original and copy of the owner's ID card; 3. Proof of vehicle purchase tax payment or tax exemption certificate, vehicle annual inspection certificate, and relevant documents submitted during vehicle registration; 4. Non-local residents also need to bring a residence permit and proof of the vehicle's origin; 5. For imported vehicles, additional documents include import certificates, vehicle whole-vehicle factory qualification certificate, and compulsory traffic insurance certificate.
7
5
Share

Should the tire pressure be the same for front and rear wheels of a sedan?

Front tire pressure and rear tire pressure can be different, but the difference should not be too large. Tire pressure is a range, not an exact value. In certain specific situations, it is more appropriate for the rear tire pressure to be higher than the front tire pressure. Below is relevant information: 1. For example, when the rear seats are fully occupied by three people and the trunk is also loaded with many items, the rear tire pressure should be higher than the front tire pressure. Higher rear tire pressure can make the car more fuel-efficient, resulting in lower fuel consumption. Additionally, the car can accelerate faster. The principle is: the higher the tire pressure, the smaller the contact area between the tire and the ground; the lower the tire pressure, the larger the contact area. 2. The front wheels are not only the driving wheels but also the steering wheels. If the front tire pressure is higher, the wear on the front tires will increase. Both the front and rear tire pressures must be within the standard range, and the difference should ideally not exceed 0.1bar.
18
5
Share

Is 0W40 Oil Suitable for All Seasons?

0W40 engine oil is considered all-season oil, but its suitability still depends on the temperature of the location where the vehicle is used. The 0W designation indicates the oil's cold-start performance—the smaller the number, the better the oil's cold resistance. Therefore, using 0W40 oil allows for easy engine starts even in cold weather. The number 40 represents the kinematic viscosity standard at 100°C (between 12.5mm²/s and 16.3mm²/s). Additional information: 1. In fact, many modern engine oils are designed for both winter and summer use, primarily depending on the oil's quality grade and performance. If the engine frequently operates under high-load conditions (accelerating oil consumption), it is advisable to use full synthetic or semi-synthetic oil. 2. As for quality grades, following the level specified in the vehicle's manual is generally sufficient for daily use. However, if the vehicle is often driven in congested urban environments, upgrading to a higher-grade oil (more environmentally friendly and economical) may be considered.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.