···
Log in / Register

How much engine oil should be added to the Suzuki UY125?

3 Answers
OAlina
09/01/25 5:52am
The manual indicates that 650ml should be added when the engine oil is drained relatively cleanly, but this is generally difficult to achieve. In practice, adding around 600ml is sufficient. Engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Timely oil changes help protect the normal operation of various engine components. When the engine lacks oil, the following symptoms may appear, and new oil should be promptly added to ensure the vehicle's normal operation. Low engine oil levels may lead to insufficient oil pressure, triggering the oil pressure warning light on the dashboard to alert the driver. When oil is low, engine noise may increase, and lubrication may be inadequate. Severely low oil pressure due to insufficient oil can result in poor lubrication of the engine's friction surfaces, leading to abnormal vibrations, reduced power, and in severe cases, engine "bearing seizure." "Bearing seizure" refers to the burning and erosion of the crankshaft bearings and bearing shells due to poor lubrication, manifesting as abnormal engine vibrations until the engine stalls. After stalling, the engine may fail to restart. Additionally, it can cause the engine's variable timing solenoid valve to malfunction, leading to imprecise control of the engine's intake and exhaust valves, resulting in reduced power and increased fuel consumption.
Was this review help?
9
2
Share
JanelleLynn
09/13/25 8:32am
The oil capacity for the Suzuki UY125 is approximately 0.9 liters, especially during a full oil change. I've ridden it for several years and always changed the oil myself. I make sure to drain the old oil completely before adding new oil. After adding, I start the engine and let it run for a few minutes to warm up, then turn it off and let it sit before checking the oil level with the dipstick. The oil level should be between the minimum and maximum marks. Using the wrong amount of oil can cause serious issues—too much oil can lead to smoking and sluggish performance, while too little can result in insufficient lubrication, causing engine knocking and reduced lifespan. Choosing the right oil brand is also crucial; a 10W-40 synthetic oil is suitable, and avoid cheap, low-quality oils. Regular oil changes every 2,000 to 3,000 kilometers ensure smooth operation and reduce the risk of major repairs. Proper maintenance keeps a scooter running well for longer, and once it becomes a habit, it's easy to maintain.
Was this review help?
16
5
Share
Expand All
DeLiam
10/28/25 2:29am
For those who frequently work on cars, the recommended oil capacity for the Suzuki UY125 is approximately 0.9 liters. When changing the oil, first drain the old oil completely before adding new oil. Pour slowly to avoid spills. After completing the task, don't rush to finish—start the engine and let it run for a few cycles before turning it off. Wait a few minutes for the oil to settle, then check the dipstick. The dipstick has markings, and the oil level should ideally be in the middle. It's recommended to use 10W-40 fully synthetic or semi-synthetic oil for better adaptability. Too much oil can increase engine pressure and cause leaks, while too little oil can lead to increased friction, overheating, and part damage. Owners are advised to consult the manual for confirmation and change the oil every 2,500 kilometers or so. During maintenance, it's also a good idea to check other parts like the chain or tires—this approach is both cost-effective and hassle-free.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

What is the default PIN password for Tesla?

The default PIN password for Tesla is 0000, 1234, or 1111. It is a production identification code used for clearing fault codes, matching performance after replacing important components, and matching car keys, ensuring the security of the vehicle. Here is some related information about Tesla: Tesla is an American electric vehicle and energy company that produces and sells electric vehicles, solar panels, and energy storage devices. Headquartered in Palo Alto, it was founded on July 1, 2003, by Martin Eberhard and Marc Tarpenning. The founders named the company "Tesla Motors" in honor of the physicist Nikola Tesla. Tesla's first car product, the Roadster, was released in 2008 as a two-door sports car. In 2012, Tesla released its second car product—the Model S, a four-door all-electric luxury sedan; the third car product was the Model X, a luxury all-electric SUV, which began deliveries in September 2015. Tesla's next car was the Model 3, first unveiled in March 2016 and began deliveries in late 2017. In February 2019, Elon Musk announced that all Tesla electric vehicle patents would be open-sourced.
3
3
Share

What are the colors of license plates?

Different colors of license plates have different meanings. The main categories of license plate colors are as follows: 1. White license plates: Represent special departments such as public security, procuratorate, judiciary, and armed police. 2. Blue license plates: Represent ordinary small cars, including small-tonnage trucks. 3. Yellow license plates: Represent large vehicles such as trucks and trailers, as well as coach cars, engineering vehicles, motorcycles, or vehicles exceeding 6 meters in length. 4. Green license plates: Represent new energy vehicles, which have only appeared in the last one or two years. 5. Black license plates: Represent two types: one is foreign embassies and consulates in China, usually with the first or last character on the plate being "Embassy". The other is Sino-foreign joint ventures, although this type of license plate is no longer issued now.
2
4
Share

What is the special tool for installing piston rings called?

The special tools for installing piston rings come in two types: one is called an expander, and the other is called pliers. The pliers are equipped with limit stops. To install piston rings into the ring grooves, a dedicated expander is used to improve efficiency. Alternatively, specialized pliers with limit stops can also be employed, effectively restricting the maximum opening of the piston ring to prevent over-expansion, which could lead to breakage or deformation. When servicing an engine, piston ring installation and removal pliers must be used to disassemble the piston rings. These pliers are specifically designed for installing and removing piston rings. When using them, force must be applied evenly to avoid excessive pressure that could break or damage the piston rings, while also preventing hand injuries. Piston ring installation precautions: For tapered cross-section piston rings, the tapered side should face upward. When installing piston rings flat into the cylinder liner, ensure there is a certain gap at the joint. The openings of each piston ring should be staggered by 120° and must not face the piston pin hole. Chrome-plated rings should be installed in the first groove, with the opening not facing the vortex pit direction at the top of the piston. Piston rings should be installed on the piston, with a certain side clearance along the height direction within the ring groove. When installing twist rings, the chamfer or notch should face upward. For tapered reverse-twist rings, the tapered side must face upward. When installing combination rings, first install the axial spacer ring, followed by the flat ring and the wave ring. Additionally, place a flat ring above and below the wave ring, ensuring the openings of each ring are staggered.
12
1
Share

Has the Lamborghini Spontaneous Combustion Issue Been Resolved?

No. Causes of Lamborghini spontaneous combustion: Aging circuits: The engine compartment is packed with various electronic components and wires. If the insulation of the wires deteriorates and breaks, leading to leakage or short circuits, it can easily ignite a fire, causing the vehicle to spontaneously combust. Aging fuel lines: The car engine compartment is inherently poorly ventilated, and combined with high temperatures from exposure to the sun and heat generated by various components, the temperature inside the engine compartment can become quite high. If fuel lines are leaking due to aging and damage, it can also very easily lead to spontaneous combustion. Lack of lubrication in the lubrication system: If the engine's lubrication system lacks oil, the surfaces of mechanical parts can generate high temperatures due to friction, and flammable materials can be ignited under the influence of heat conduction or radiation, ultimately leading to a fire. However, this situation is more common in trucks. Improper modifications: Many car owners like to add various components to their beloved cars, such as xenon lights, fog lights, and parking sensors, but due to unprofessional and non-standard modifications, the wiring can become messy and connections unstable, leaving hidden dangers for spontaneous combustion.
16
3
Share

Must I Renew My Driver's License on the Same Day After the Medical Examination?

The validity period of the physical condition certificate is 6 months. After the medical examination for driver's license renewal, the renewal must be processed within 6 months. Here are the relevant details: 1. Regulations: Article 57 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": A motor vehicle driver shall apply for license renewal at the vehicle management office of the original issuing authority or another location within 90 days before the expiration of the current driver's license. 2. Required Materials for Renewal: Identity proof of the motor vehicle driver; the motor vehicle driver's license; a physical condition certificate issued by a county-level or higher medical institution or a military medical institution at or above the regimental level.
13
1
Share

Will Water in the Turn Signal Affect Its Use?

Water in the turn signal will not affect its use, but it is recommended to visit a 4S shop or repair shop to determine the cause of the water ingress and have it repaired. A car turn signal is a flashing indicator light that is activated when the vehicle is turning, alerting pedestrians or vehicles in front or behind to the direction the vehicle is moving. Below are the correct ways to use car lights: Roads with poor lighting: On roads without street lighting or with poor lighting, high beams can be used. However, when approaching other vehicles or pedestrians, switch to low beams to avoid glare. When needing to read road signs or other markers: When unfamiliar with the road and needing to read road signs or other markers, high beams can be used, but they should be quickly switched back to low beams. When overtaking another vehicle: The left turn signal should be activated in advance, and high beams or the horn can be used to alert the vehicle ahead to yield. When passing through corners, curves, or intersections without traffic signals: Alternating between high and low beams can serve as a reminder. When driving through tunnels: Turn on high beams, and when encountering oncoming vehicles, switch to low beams in advance. In urban areas with street lighting at night: Low beams must be used. In areas without street lighting at night: When driving in areas without street lighting at night or during dusk or dawn, low beams must be turned on. When visibility is obstructed: If encountering heavy fog, snow, or heavy rain that obstructs visibility, low beams must be turned on even during the day.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.