···
Log in / Register

How many liters of engine oil does the Volkswagen Lavida require?

3 Answers
DiDerek
09/06/25 2:44am
The Volkswagen Lavida requires 4 liters of engine oil. Method for changing engine oil: Loosen the nut at the bottom of the transmission oil pan and allow the old transmission oil to drain naturally by gravity; connect the transmission and the circulation machine through pipeline interfaces, and the new transmission oil will push out the old transmission oil under pressure; remove the oil pan to change the oil. Methods to determine whether the engine oil needs to be changed: Pull out the oil dipstick and smell it closely. If there is a strong sour odor, it indicates that the oil has deteriorated and should be changed; rub the old oil between your thumb and forefinger repeatedly. If you feel impurities, poor viscosity, or even a rough texture, it should be changed; hold the oil dipstick at a 45-degree angle under light and observe the oil droplets. If you can clearly see no wear particles in the droplets, it is in good condition. If there are many wear particles, it should be changed.
Was this review help?
7
3
Share
MacAlina
09/18/25 2:48am
I've been driving a Volkswagen Lavida for several years and always remember adding about 4.4 liters of engine oil during oil changes, depending on the engine model. For example, the 1.5L naturally aspirated version takes roughly 4.3 liters, while the 1.4T turbocharged version requires around 4.5 liters. New drivers should never guess—always check the vehicle manual or consult the dealership. Adding too much oil can damage the engine, while too little can cause part wear. During my first maintenance, I almost overfilled by half a liter, so now I always check the oil level with the dipstick before changing. I recommend changing the oil every 5,000 to 10,000 kilometers, preferably using full synthetic oil for better engine protection and longevity. I also make it a habit to regularly check the oil's color and level while driving to avoid discovering issues too late.
Was this review help?
8
5
Share
Expand All
Howard
11/01/25 3:13am
As someone who frequently works on car repairs, I know that the oil capacity for the Lavida generally ranges between 4.0 to 4.5 liters. For example, the older 1.6L models use 4.3 liters, while the newer turbocharged engines require 4.5 liters. This amount isn't fixed—when changing the oil, you need to fully drain the old oil before precisely adding the new one to avoid residual impurities affecting the fresh oil. Synthetic oil is recommended as it's slicker than mineral oil, reducing engine friction noise. Remember to check the oil pan or filter screen, as older cars may develop leaks leading to insufficient oil levels. It's best to choose a reputable shop for oil changes—they know how to measure properly, whereas DIY attempts can easily exceed the limit. Keeping the oil clean is key to extending engine life, saving both money and hassle.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

What kind of engine oil should be used for the new Geely Emgrand?

Geely Emgrand is better suited for 5w40 engine oil, which serves to lubricate and reduce friction in the engine, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption. Below are the detailed specifications of the 2020 Geely Emgrand GL: 1. It is a compact car with body dimensions of 4725mm in length, 1802mm in width, and 1478mm in height, a wheelbase of 2700mm, a fuel tank capacity of 55 liters, and a curb weight of 1335kg. 2. The 2020 Geely Emgrand GL features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L turbocharged engine that delivers a maximum horsepower of 141PS, a maximum power of 104kW, and a maximum torque of 235Nm, paired with a 6-speed manual transmission.
16
1
Share

What are the reasons for the left and right brake lights of the new Audi Q5L not working?

Here are the specific reasons why the left and right brake lights of the new Audi Q5L may not be working: Reasons for brake lights not working: Brake light filament burned out, bulb damaged; Brake light switch malfunction, unable to control the brake lights; Poor grounding of the brake light. Inspection methods: First, remove the brake light bulb to check if the filament is burned out; If the bulb is intact, press the brake pedal and measure whether there is power at the live wire terminal of the brake light bulb. If there is power, it indicates poor grounding of the brake light; If there is no power, check the brake light switch and wiring. Short-circuit the brake light switch terminals. If the brake light turns on, it means the brake light switch is faulty and should be replaced; If it does not turn on, it indicates an open circuit in the wiring, and the break point should be located and repaired.
5
3
Share

Will modifying handlebar mirrors on a motorcycle result in penalty points?

Modifying handlebar mirrors on a motorcycle will not result in penalty points, but it is subject to fines as it constitutes a violation. Here are the relevant details: Motorcycle Components: The engine is a two-stroke or four-stroke gasoline engine, cooled either by natural or forced air cooling. The transmission system of a motorcycle includes primary reduction, clutch, gearbox, and secondary reduction. The function of the running system is to support the weight of the entire vehicle and its load, ensuring stable handling and comfortable riding. The running system mainly consists of the frame, front fork, front shock absorber, rear shock absorber, wheels, etc. Modification Scope: Motorcycle modifications must comply with national or local laws to be legal. Accessories such as phone mounts for the rider's convenience, safety crash protectors, engine guards, etc., are within reasonable and legal limits. However, any modifications involving changes to the motorcycle's mechanical structure are not permitted.
19
4
Share

Is the steering wheel of the Volkswagen Lamando equipped with electronic power assistance?

The steering wheel of the Volkswagen Lamando is equipped with electronic power steering. Here are the detailed specifications: 1. It is driven by an electric motor, not the previous hydraulic power steering. Electronic power assistance is essentially provided by electricity. Theoretically, the assistance is available as soon as the car is powered on, but in most cases, the engine needs to be started for the assistance to work. The advantages include making the steering wheel very light and adjustable to be heavier at high speeds and lighter at low speeds, with minimal fuel consumption. 2. There are various types of electric power steering. Some electric power steering systems have poor feedback in terms of direction, and for certain vehicles with electric power steering, the feedback during turns is very poor, requiring the driver to manually steer back. Another point about electric power steering is that it does not use power steering fluid. If the vehicle body is heavier, the steering system needs to provide greater assistance energy.
1
2
Share

Why does the motorcycle stall immediately after starting?

It is likely due to low idle speed or no idle speed. If the idle speed is too low, you can adjust it yourself or take it to a repair shop. Here are the detailed explanations: Reasons for stalling: When the motorcycle stalls automatically while riding, first check if the fuel is exhausted; if fuel is not being supplied properly or if the engine temperature is too high. Solutions: Adjust the air-fuel mixture slightly by turning it out about 1.5 turns. You can also appropriately increase the idle speed; clean or adjust the air-fuel mixture screw (requires a professional mechanic) and the idle speed screw; remove the air filter and check if the motorcycle stalls. If it doesn't stall, it means there's insufficient air intake due to a clogged air filter, and replacing the air filter element should solve the issue; cold start refers to starting the engine when the coolant temperature is low, usually after the motorcycle has not been used for a long time.
10
3
Share

What is the function of the L gear in Honda Fit?

The detailed information about the function of the L gear in Honda Fit is as follows: 1. The L gear refers to the low gear mode of the transmission. It is mostly used for climbing, descending, or getting out of difficult situations. However, in some cars, the L gear can also be used as a manual gear, and it is very simple to use. 2. When descending a mountain or a long slope, shifting to the L gear can limit the car's gear to automatically stay in the low gear, allowing the car to use the engine's power for braking when going downhill. This prevents the driver from having to press the brake for a long time, which could overheat the brake pads and cause danger. 3. It is most effective in severe traffic congestion or on steep slopes. When going up or down a slope, the car's engine torque can be fully utilized. The L gear in the Fit is a low-speed gear needed for climbing or driving on snowy and icy roads.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.