···
Log in / Register

Can the original exhaust of Audi A7 be replaced?

3 Answers
FelixMarie
08/29/25 5:01am
The original exhaust pipe can be replaced. Function of exhaust pipe: The automobile exhaust bellows, also known as the automobile exhaust flexible pipe, is installed in the exhaust pipe between the engine exhaust manifold and the muffler. It enables flexible connection of the entire exhaust system, thereby playing roles in vibration reduction, noise reduction, convenient installation, and extending the service life of the exhaust muffler system. Exhaust pipe maintenance: Avoid water ingress into the exhaust pipe. During daily driving, prevent water from entering the exhaust pipe. If water accidentally enters the exhaust pipe during car washing or rainy day driving, perform hot car treatment under idle conditions to expel accumulated water through exhaust, with a recommended duration of about ten minutes; Regularly apply anti-rust oil: During exhaust system maintenance, it is recommended to apply anti-rust oil inside the exhaust for rust prevention treatment, adding anti-rust oil from the connection point between the exhaust and the engine.
Was this review help?
6
4
Share
Amanda
09/11/25 2:49am
I've been driving an Audi A7 for almost three years now and really enjoy tinkering with cars. Installing an aftermarket exhaust is one of the things I've done. Swapping the exhaust is genuinely thrilling—it makes the sound deeper and more powerful, almost like a race car when you floor it. On the highway, the acceleration feels noticeably quicker. I've used high-end brands like Akrapovic, but installation should be done by professionals; otherwise, you might end up with exhaust leaks or noise violations, which can lead to fines and penalty points if the police catch you. The driving experience becomes way more exciting, especially during weekend joyrides when the roar is exhilarating. Just be mindful of local noise regulations—don’t rev too loudly at night in the city. I spent tens of thousands on it, saved a bit by buying parts online, but labor costs were significant. After the upgrade, the power improved, though fuel consumption increased slightly. Long-term, you’ll need to check the sensors to avoid affecting the car’s ECU. Totally worth it—way more fun to drive now.
Was this review help?
20
0
Share
Expand All
McJack
10/25/25 3:37am
As a long-time Audi A7 owner, I certainly believe the exhaust system can be replaced. The most common scenarios are when the original exhaust deteriorates due to aging cracks or rust clogging, causing power loss and black smoke emissions. When replacing, I opted for genuine parts at the dealership - reliable quality with perfect compatibility that won't void the original warranty. If you're considering performance exhaust upgrades for louder sound, be mindful of potential noise complaints from neighbors, especially in residential areas. Always check local emission regulations to avoid violations. Safety first - never attempt DIY as hot exhaust pipes pose burn risks; professional technicians can complete the job safely using lifts within an hour. During routine maintenance, inspect for corrosion - typical exhaust lifespan is about 6-7 years. Post-replacement, you'll notice smoother acceleration and restored quiet operation.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

How many months old can a baby sit in a car seat?

Generally speaking, babies should be at least six months old before they can sit in a car seat. Here are the relevant details: 1. The reason for 6 months: Babies under six months old have not yet developed their bones to a certain extent, and the support strength of their back muscles is also very weak. At this stage, placing them in a car seat could potentially cause harm to the baby. 2. Age stages for child car seats: Child car seats are typically designed for children under eight years old or weighing less than 36 kilograms. Of course, this is not a strict rule, as car seats do provide better safety for babies. However, car seats should be selected based on the child's age. For babies under one year old, a rear-facing infant car seat (or bassinet-style seat) should be chosen. For children aged one to three years, a fully enclosed car seat is recommended. For children over three years old, it is best to use an enclosed car seat.
6
5
Share

How to Quickly Adapt to the Test Car?

Methods to quickly adapt to the test car: 1. Familiarize yourself with the venue: Visit the test venue in advance to understand the situation. 2. Gather information: Find out about the vehicles used during the test beforehand. 3. Participate in mock test training whenever possible: There are institutions that specialize in mock tests, although they charge a fee. Students who feel the need can try them out. 4. Change vehicles: During regular practice, pay attention to practicing with different vehicles: some driving schools allow vehicle changes, while others do not. If changing vehicles is not possible, take every opportunity to familiarize yourself with different car models to maximize your speed in getting accustomed to the vehicle, which is also very helpful for passing the test.
1
0
Share

What Does the Comprehensive Service Fee Include?

Comprehensive service fees are only applicable to installment car purchases, serving as labor charges for 4S stores. This fee is generally not charged for full payment purchases. Below is a detailed introduction to the comprehensive service fee: 1. Content of the comprehensive service fee: The comprehensive service fee is usually specified in the contract appendix and includes site rental fees and vehicle maintenance fees after the vehicle is transported back. 2. Precautions: The collection of comprehensive service fees is not within the scope of price management, but 4S stores must publicly display the content of related services in the store. If the comprehensive service fee stated in the contract is unclear, consumers have the right to choose not to accept it.
2
2
Share

Can vehicle annual inspection be conducted in a different location?

Except for large passenger buses and school buses, which cannot undergo annual inspection in a different location, all other vehicles can. Currently, the traffic management authorities have fully implemented cross-province annual inspections for small cars, trucks, and medium-sized passenger vehicles. Applicants can directly conduct the inspection in a province other than the vehicle's registration location and apply for the inspection compliance mark without needing to go through the entrustment inspection procedure. Large passenger buses and school buses must return to the vehicle's registration location for inspection and cannot undergo it elsewhere. Annual inspection time requirements: Small and micro non-operational passenger vehicles are exempt from inspection for the first 6 years. After 6 years but less than 10 years, they must be inspected every two years; after 10 years but less than 15 years, they must be inspected annually; after 15 years, they must be inspected every 6 months. Operational passenger vehicles must be inspected annually within the first 5 years; after 5 years, they must be inspected every 6 months. Trucks and large and medium-sized non-operational passenger vehicles must be inspected annually within the first 10 years; after 10 years, they must be inspected every 6 months. Imported vehicles, like other vehicle types, can undergo regular inspection at any inspection site. Annual inspection precautions: Vehicles that fail the annual inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not participate in the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership. Vehicles that meet the scrapping conditions or have exceeded the prescribed service life will not be inspected, and their license plates will be revoked, their records deleted, and they will be scrapped.
18
4
Share

How to Open a Car Wheel Lock?

To open a car wheel lock, use the car lock key. Without it, the lock cannot be opened. Here is some related information: 1. Wheel locks securely fasten tires: Wheel locks are made entirely of steel plates and feature anti-theft, anti-technical opening, anti-tire removal, and anti-key duplication characteristics. They can conveniently and securely lock the tires of vehicles in violation, effectively preventing them from evading penalties. They are easy to operate, allowing a single person to handle them independently, providing great convenience for traffic law enforcement officers. 2. Wheel locks are the best choice for theft prevention: Wheel locks are also the best choice for private vehicle theft prevention, especially when the vehicle is parked in less secure locations. Using them to lock the outer tires makes the lock visible, deterring thieves from attempting theft in broad daylight with tools. For car owners, using wheel locks is very secure. It is important to remind everyone to keep the keys safe.
1
3
Share

Is the SVS light on the car dashboard serious?

The vehicle condition is quite serious at this point. When the SVS light appears on the dashboard, it indicates a malfunction in the vehicle's engine. The driver should immediately stop the car in a safe manner and contact professional maintenance personnel for repairs. Here is some relevant information: 1. Reasons for the SVS light being on: The SVS light is similar to the engine malfunction light. When the SVS indicator lights up, it means the engine control unit has detected an erroneous signal from a sensor or that the sensor has exceeded its standard usage limits. When the ignition is turned on, the SVS light will illuminate briefly for an automatic check and then turn off after a few seconds, allowing the vehicle to operate normally. 2. What to do when the SVS light is on: First, check if other vehicle equipment shows any abnormalities, such as the coolant temperature gauge or the oil pressure warning light. If only the SVS light is on and the engine can still be started, drive cautiously, control your speed, and promptly take the car to a repair shop for inspection. If symptoms like increased combustion chamber temperature or the oil pressure warning light appear, continuing to drive could significantly increase engine wear, leading to premature engine damage.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.