···
Log in / Register

Can New Energy Vehicles Be Used While Charging?

3 Answers
DeEleanor
09/03/25 4:21am
New energy vehicles can be used while charging. However, this practice is not recommended. This approach increases the internal charge load on the battery, causing the battery pack to continue operating before it is fully charged, which significantly accelerates the battery degradation of the power battery pack. Below is a detailed introduction to new energy vehicles: Overview: New energy vehicles refer to automobiles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. Others: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, hydrogen engine vehicles, etc. Pure electric vehicles are automobiles that use a single battery as the energy storage power source.
Was this review help?
12
1
Share
EverlyDella
09/15/25 5:57am
As an owner who has driven electric vehicles for several years, I can say that most new energy vehicles allow continued use of in-car functions while charging, such as air conditioning, infotainment systems, or lighting. This is because modern EVs are designed with independent charging systems and onboard circuits, where the main charging power doesn't affect auxiliary equipment operation. I often sit in my car with the AC on reading books or browsing my phone while charging at home, finding it convenient and time-efficient. However, pay attention to the difference between fast charging and slow charging: fast charging stations may automatically limit high-power-consuming devices due to their high wattage to prevent overheating; slow charging like home charging piles are relatively safer. Still, I recommend not overusing this feature as it may slightly impact battery lifespan – repeated high-load usage could accelerate battery aging. Therefore, I use it moderately when necessary, especially turning on AC only during extreme weather conditions.
Was this review help?
13
2
Share
Expand All
VanZane
10/29/25 6:36am
From a safety perspective, using the car while charging requires caution. Through my experience with multiple vehicles, I've learned about the potential risks: for instance, adding extra load to the battery during charging, such as using the heater or high-volume audio, may cause overheating or voltage instability. Once, while charging at a highway service area in summer with the air conditioning on, the dashboard displayed a temperature warning, prompting me to turn it off immediately. Later, I realized this increased battery stress, and doing so frequently could shorten component lifespan. Now, I only use necessary functions, like turning on a low-power fan briefly while waiting, avoiding simultaneous operation of multiple high-power functions. Additionally, different car models handle this differently; some automatically disable certain devices in fast-charge mode to protect the system, so checking the manual is essential. In summary, it's possible but not advisable to do so casually.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What is the actual fuel consumption of the Jetour X70?

The actual fuel consumption of the Jetour X70 is 7.4L/100KM. Maintain proper tire pressure: Checking tire pressure not only benefits fuel consumption but also relates to driving safety. Develop the habit of checking tire pressure daily when using the car. Generally, the front tire pressure should be 2.2-2.3, and the rear tire pressure should be 2.4-2.5. Start slowly: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Starting by gently pressing the accelerator can shorten the engine's warm-up time and effectively improve fuel efficiency, thereby achieving fuel-saving effects.
17
0
Share

How to Turn Off the Start-Stop Function on the Malibu XL?

The Malibu XL can directly press the auto start-stop button, and generally the dashboard will prompt you that the system is turned off. If you want to use this function again, simply press the button to turn it back on. More information about the auto start-stop is as follows: 1. The engine auto start-stop automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) while driving. When it's time to move forward again, the system automatically restarts the engine. Its English name is STOP&START, abbreviated as STT. The STT intelligent fuel-saving system is a set of systems that control engine start and stop. 2. How the start-stop system works: When the vehicle stops moving due to congestion or at an intersection, the driver presses the brake pedal and shifts into neutral. At this time, the auto start-stop system automatically detects: the engine is idling and not in gear, the wheel speed sensor of the anti-lock system shows zero, and the electronic battery sensor indicates there is enough energy for the next start. After these three conditions are met, the engine automatically stops running. When the traffic light turns green, the driver presses the clutch, and then can activate the 'start-stop device' to quickly start the engine. In automatic transmission models, as soon as the brake is released or the steering wheel is turned, the engine will automatically ignite immediately, allowing the driver to step on the accelerator to start, with the entire process remaining in D gear.
12
5
Share

Does the Volvo S90 have a hybrid version?

Volvo S90 does have a hybrid version. The Volvo S90 excels in the following aspects: 1. Power. It is equipped with a 2.0T turbocharged engine, with a maximum power of 235kw and a maximum torque of 400nm, paired with an 8-speed automatic transmission. The electric motor has a maximum power of 65kw and a maximum torque of 240nm. 2. Body dimensions. The Volvo S90 has a length of 5083mm, a width of 1879mm, and a height of 1450mm. 3. Configuration. The Volvo S90 adopts an independent suspension system with front double wishbones and rear multi-link. Additional information: The hybrid mode consumes about 3 to 4 liters per 100 kilometers, while driving in the city requires about 6 liters per 100 kilometers.
16
4
Share

Where is the headlight height adjustment for the 2021 Highlander?

The headlight height adjustment for the 2021 Highlander is located on the left side of the steering wheel. Body specifications: The Highlander is a mid-size SUV under Toyota. The new Highlander has a wheelbase of 2790 mm, with length, width, and height measuring 4890 mm, 1925 mm, and 1720 mm respectively. Powertrain: The new Highlander is equipped with a 2.0-liter turbocharged engine across all models, delivering a maximum power of 162 kW and a maximum torque of 350 Nm. The engine reaches its peak power at 5200 to 5600 rpm and its peak torque at 1800 to 4000 rpm. The engine features VVT-iW technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission.
4
0
Share

How Many Cylinders Does the Volkswagen Tayron Engine Have?

The Volkswagen Tayron engine is a four-cylinder engine, domestically produced at Volkswagen's Dalian factory. The 1.4T version of the Volkswagen Tayron uses the EA211 engine model, with a maximum power of 110KW, a maximum torque of 250Nm, and a maximum horsepower of 150. The 2.0T version uses the EA888 engine model, with a maximum power of 137KW, a maximum torque of 320Nm, and a maximum horsepower of 186. Daily maintenance for the Volkswagen Tayron engine can be performed using the following methods: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate over time. After a certain mileage, performance degradation can lead to various engine issues. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.
3
5
Share

What Causes the Jaguar Daytime Running Lights to Not Work?

Possible reasons for the sudden failure of Leopard car headlights include bulb burnout, overheating wires, damage to relays or combination switches, open or short circuits in wiring, fuse damage, or poor contact in the circuit. Specific reasons: The fuse for the daytime running lights is blown. Generally, if the fuse is blown, both sides will not light up. If only one side is not working, it is probably not a fuse issue; wiring harness failure. Check the wiring harness between the headlight control module and the daytime running lights; failure of the light guide ring driver. For example, loose or poorly connected driver plugs. Function of daytime running lights: Turning on daytime running lights during daytime driving can reduce traffic accidents by 12.4% and lower the probability of fatal crashes by 26.4%. In reality, daytime running lights have indeed improved road safety, especially in areas with heavy fog, haze, or poor visibility, making them very effective.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.